PEAK-System Forum

Hello,

yes, please update to version 5.4 when using Windows 10. You will find the link to the latest version 5.4.3 on the startpage of PCAN-Explorer 5. Please note that PCAN-Explorer 5 is out of support since several years now. If you are not able to download the new version, please send an email ...

Hello Julian,

thank you for the feedback.

regards

Michael

Hi,

no, there is no log available for a power loss. Please check if this problem will also happen when using a 12V battery,

regards

Michael

Hello,

please check the status on the LEDs in that moment, to see what is the state of the power and the CAN channels in that moment.

regards

Michael

Hello,

thank you for the info. Can you please check the power supply of the PCAN-USB X6. It looks like the devise reboots due to power loss. Please check the state of the LED (Power Supply) when this problem occur. The power supply must supply at least 350mA at 12V. As a test, please use a 12V ...

Yes, this is possible. Please see quick start guide page 8 for more details:

https://www.peak-system.com/produktcd/P ... rt_eng.pdf

Hi,

under Windows we offer the Virtual PCAN-Gateway software tool, which will handle the PCAN-Ethernet interfaces similar as a direct connected PCAN-PC-interface. Unfortunately this option is not available under Linux. Here you have to write an own application using the Ethernet protocol ...

Hello,

thank you for your post. Looks like you are using an older canapi4.dll in your system. Please send an email with your complete address details of your company and the license ID of your PCAN-Developer 4 package to our support email address (support.peak[at]hms-networks.com), to check ...

Hello,

we received some support requests regarding an issue with the 3rd party software Ligier G499Diag Software, which shows the following error message:

Ligier_G499Diag.exe.jpg

To fix the issue, please install the latest PCAN-PassThru drivers from our website and restart your Windows once ...

Hello,

we received some support requests regarding an issue that the Bosch Rexroth BODAS software won't work on systems on which the latest PEAK-Driver 5.x are installed.
There is an error dialog displayed which tells you "Driver version not supported (needs 3.x):

Bodas.jpg

In that case ...