PEAK-System Forum

Hi Michael

I have tried again the same test with insmod pcan.ko fdusemsi=1. I don't know what was happenig in the first test.
Now it is working !!! I am going to test all ports and combination of them.

Please, could you explain me the parameter and what it was happening ?


This is the output of ...

Hi.

Sorry Michael, it was my "not" mistake.

I have tested insmod pcan.ko fdusemsi=1, but it is the same, I can't see the signals.

Thank you.
Best regards

Hi.

No, it is not working on IMX6, only it is working on X86 paltform.

Best regards.

Hi
For another test, I have unsoldered fields that i said before.
This consists on testing the same driver on X86 platform with ubuntu-16.04.5-desktop-i386.

In this case, the driver is working. i can see the signals in the osciloscope and connect the ports to comunicate them.
The procedure to test ...

Hi Michael.

I have tested:
cangen can0
cangen can1


cat /proc/pcan :

*------------- PEAK-System CAN interfaces (http://www.peak-system.com) -------------
*------------- Release_20190802_n (8.9.0) Sep 25 2019 07:54:00 --------------
*------------------------- [mod] [pci] [pec] [net ...

Hi Michael.

Yes, this is correct.
Hi,

you should measure around 60 ohms when both channels are terminated!

Please check your CAN cable again, that CAN-H and CAN-L are connected 1:1.

regards

Michael.

But the problem is i can't sent data. When i run cansend can1 01a#CAFEBABE, the data are not ...

Hi.

The resistance value is approximately 124 Ω

Thank you.
Best regards.

Hi

Sorry, the page in document is 17 and the figure 9 (Internal termination)

Thank you.
best regard

Hi,

We have soldered fields acording the document (page 14) "PCAN-miniPCIe FD – User Manual" Figure 9 - Document version 1.2.0 (2019-09-10).

I attach photos.

Thank you.
Best regards.

Dear Michael.

Thank you for your support.

We need to check our carrier board because the PCAN-miniPCIe FD is detected in development carrier board.

I have questions:
do we have to use the peak-linux-driver-8.x for this PCAN-miniPCIe FD? or
is the driver (PEAK PCAN-PCI/PCIe/miniPCI Cards) in ...