Search found 487 matches

by M.Heidemann
Tue 11. May 2021, 15:45
Forum: PCAN-MIO
Topic: PID Function
Replies: 3
Views: 20

Re: PID Function

Hello Vivek,

As mentioned in the PPCAN-Editor manual, these paraemters are fixed:
FunctionBlocksHelp.png
FunctionBlocksHelp.png (16.2 KiB) Viewed 3 times
If you want to change these, you'll have to adjust them in your configuration and resend
it to your device. They cannot be changed at runtime.

Best Regards

Marvin
by M.Heidemann
Tue 11. May 2021, 13:10
Forum: PCAN-MIO
Topic: PID Function
Replies: 3
Views: 20

Re: PID Function

Hello, A PIDT element is available as a so-called function block in PPCAN-Editor 2, see page 22 of the function block reference: https://www.peak-system.com/produktcd/Pdf/English/PPCAN-Editor_References_eng.pdf The PPCAN-Editor Help provides further information on the usage of function blocks: Funct...
by M.Heidemann
Tue 11. May 2021, 09:26
Forum: PCAN-Developer 4
Topic: Example of connection to PCAN-LAN Device
Replies: 1
Views: 7

Re: Example of connection to PCAN-LAN Device

Hello, As a first step: Use PCAN-View to confirm, that your routes on both the PCAN-Ethernet Gateway and the Virtual PCAN-Gateway are correctly configured and that you are able to send/receive data using the PCAN-Ethernet Gateway as a PCAN-Interface. Once this is working, please contact us at suppor...
by M.Heidemann
Mon 10. May 2021, 16:30
Forum: Linux
Topic: Linux Name Resolution (DNS) Failure
Replies: 8
Views: 248

Re: Linux Name Resolution (DNS) Failure

Hello,

Are you able to reproduce this issue,
when another network-adaptor is added instead of the PCAN-USB FD(a usb-wifi dognle, for example)?

Please let us know.

Best Regards

Marvin
by M.Heidemann
Wed 5. May 2021, 15:33
Forum: PCAN-Router FD
Topic: CAN Extended Identifier routing
Replies: 4
Views: 1641

Re: CAN Extended Identifier routing

Hello,

No, this was not implemented.

However you can filter extended-IDs using conditions within your code
itself, see the example 05_Signals to see how one would go about only processing
certain extended messages.


Best Regards

Marvin
by M.Heidemann
Wed 5. May 2021, 12:08
Forum: Linux
Topic: Linux Name Resolution (DNS) Failure
Replies: 8
Views: 248

Re: Linux Name Resolution (DNS) Failure

Hi Nick, Please check "/etc/systemd/resolved.conf", is any DNS configured? Do you have a Fallback DNS configured? Please check this, configure both if necessary and check if that resolved the issue. Please report back to us, if this has changed anything for you. Possibly a service is also handling D...
by M.Heidemann
Tue 4. May 2021, 14:34
Forum: PCAN-Router Pro FD
Topic: Routing + Logging (+ Backup Battery) example?
Replies: 3
Views: 128

Re: Routing + Logging (+ Backup Battery) example?

Hello Dominik, Thank you for your feedback. We do not support RTOS development, this would go beyond the scope of support we can provide. The RTOS examples are just a basis for your own development, there are many ressources online regarding RTOS development which can be consulted. The Microcontroll...
by M.Heidemann
Tue 4. May 2021, 11:31
Forum: PCAN-Router Pro
Topic: Forward all messages from CAN's with different bit rates
Replies: 6
Views: 101

Re: Forward all messages from CAN's with different bit rates

Thank you for your feedback. If you use the PPCAN-Editor for your configuration, you will have to use the I/O function "CANx Bitrate Raw" to set a custom bitrate, not included in the bitrate dropdown (set the "user"-bitrate here, in this example bitrate = 666,667 kbits): 2021-05-04 11_27_16-Window.p...
by M.Heidemann
Tue 4. May 2021, 09:59
Forum: Linux
Topic: Linux Name Resolution (DNS) Failure
Replies: 8
Views: 248

Re: Linux Name Resolution (DNS) Failure

Hello,

Is the output for

Code: Select all

systemd-resolve --status
regarding Link2 (Eth0) the same,
if the PCAN-USB FD is not connected?

Please report back to us reagrding this.

Best Regards

Marvin
by M.Heidemann
Tue 4. May 2021, 08:26
Forum: PCAN-Router Pro
Topic: Forward all messages from CAN's with different bit rates
Replies: 6
Views: 101

Re: Forward all messages from CAN's with different bit rates

Hello, The a custom bitrate can be defined in Firmware on both devices. The approach varies slightly due to different controllers being used, but the examples provided give a good idea on how one would implement his custom bitrate into his application. We offer a bitrate calculation tool which helps...