PEAK-System Forum

Hello, Sampling point is the point of time at which the bus level is read and interpreted as the value at that respective time (dominant/recessive). The sampling-point given as percent and can be configured to adapt to the application. It is advisable to use the same sample point if different clock ...

Hello,

Glad to hear that you were able to resolve this.

Best Regards

Marvin

Hello, You cannot use SocketCAN with the chardev driver variant, it only supports PEAKs Linux APIs. You'll need to use the NetDev variant, here's how you do that: If you want to use SocketCAN, uninstall the current driver (from the peak-driver directory): $ sudo make uninstall Clean up build environ...

Adding to U.Wilhelms answer: You are also using the wrong function for your intended purpose. CAN_LookUpChannel is is used to return 1 channels matching the given parameters the closest. You'll have to use the parameter PCAN_ATTACHED_CHANNELS_COUNT, here an example given in the PCANBasic parameter d...

Hello,

Have a look at the predefined Bitrates in PCAN-View, they give an pretty good
idea on valid bitrate settings you would typically encounter.

Best Regards

Marvin

Hello, Most likely your bitrate is incorrectly configured or your temrination is off. Make sure the bitrate is not only the same speed but also uses the same sample point. Also, you should enable error-frames in the trace menu and run a trace, this will tell you more about the error encountered. Bes...

Hello, The LicMngr.exe in C:\Program Files (x86)\PCAN-Explorer 6 will be able to show the connected Dongle visually but there is no option to dump that information. Apart from that there is no way to get this info apart from starting up PCAN-Explorer 6 and seeing if another Dongle is requested. Best...

Hello, You have already received an answer to your request via email, please check your email inbox. To quote the email: Using PEAK-Flash you may upload -any- software to the device, regardless whether it's your own (self -written) or our official PEAK software (v1.15.1 at the moment). But: Only the...

Hello, we do not have such an example, as this would be not really beneficial. When working with a LIN-bus you should be supplied with an LDF file which contains all the necessary information. If you don't have the LDF you should try to aquire because otherweise communcation will be hard to establis...

Hi Simon,

Glad to hear you got this resolved.

If anything comes up, feel free to contact us again.

Best Regards

Marvin

-closed-