Search found 1617 matches

by U.Wilhelm
Thu 25. Jul 2024, 08:23
Forum: PCAN-Basic
Topic: PEAK system module that can read a sym database
Replies: 1
Views: 14

Re: PEAK system module that can read a sym database

that can read a sym database with multiplexed and overlapped signals and decode messages from the logged write in Python We do not offer a Tool for read log files / Trace Files and decode them. If you use any of our products, please give as more clear information what exact you have done until now ...
by U.Wilhelm
Thu 25. Jul 2024, 08:21
Forum: Hardware
Topic: New to CAN
Replies: 1
Views: 25

Re: New to CAN

As no one knows what exact you do, it is hard to answer ..... As you get a physical Error (BUSHEAVY - to many erro frames - counter reach the Top Level) check the CAN Basic exact timing good cables correct termination ( 2 x 120 Ohm resistors on each end of the CAN-H / CAN-L lines ) In PCAN-View you ...
by U.Wilhelm
Tue 9. Jul 2024, 09:55
Forum: PCAN-Explorer 6 & Add-ins
Topic: Macro - Send Flaot data
Replies: 1
Views: 156

Re: Macro - Send Flaot data

If you want to use float values - create a real Signal with the Symbol Editor and use a Variable to get and set the float Value. That is the reason why to use a PCAN-Explorer - the decoding of such Signals in real time. Send a e-mail with your detailed company information, the serial number of your ...
by U.Wilhelm
Fri 5. Jul 2024, 11:32
Forum: Linux
Topic: Error codes of Chardev
Replies: 2
Views: 228

Re: Error codes of Chardev

please read the online help - there you found:
Note that the values of the different PCAN-Status definitions are able to be bitwise combined. In some cases it is possible to get more than one error code as result of calling a function.
by U.Wilhelm
Tue 25. Jun 2024, 15:54
Forum: PCAN-Router Pro FD
Topic: Firmware update to PCAN router pro FD via pcan dev pack debug apater
Replies: 21
Views: 713

Re: Firmware update to PCAN router pro FD via pcan dev pack debug apater

as you could read - openocd is supported - but your VisualStudioCode settings (NOT VisualStudio) use a different default debugger tool- (from the Cube32 IDE) "Invalid servertype parameters. The following values are supported: "jlink", "openocd", "stlink", "stutil", "pyocd", "bmp", "pe", "qemu", "ext...
by U.Wilhelm
Tue 25. Jun 2024, 14:25
Forum: PCAN-Router Pro FD
Topic: Firmware update to PCAN router pro FD via pcan dev pack debug apater
Replies: 21
Views: 713

Re: Firmware update to PCAN router pro FD via pcan dev pack debug apater

sorry - we running in cycles - it works fine on x hundred of customers systems.
check this video - for me you have a handling problem using / starting the Debugger
You MUST have installed other Tool as we do not install the Cube Tools ! So please double check - use a clean PC whatever.
by U.Wilhelm
Tue 25. Jun 2024, 14:12
Forum: PCAN-Router Pro FD
Topic: Firmware update to PCAN router pro FD via pcan dev pack debug apater
Replies: 21
Views: 713

Re: Firmware update to PCAN router pro FD via pcan dev pack debug apater

OK - but we do not know what else you setup in your VSCode ?!?
by U.Wilhelm
Tue 25. Jun 2024, 13:55
Forum: PCAN-Router Pro FD
Topic: Firmware update to PCAN router pro FD via pcan dev pack debug apater
Replies: 21
Views: 713

Re: Firmware update to PCAN router pro FD via pcan dev pack debug apater

No, we recommend to use a local folder and start from scratch - you have mixed something up on your local environment.
Keep also in mind you open the FOLDER - NEVER a File !! in VSCode
by U.Wilhelm
Tue 25. Jun 2024, 13:45
Forum: PCAN-Router Pro FD
Topic: Firmware update to PCAN router pro FD via pcan dev pack debug apater
Replies: 21
Views: 713

Re: Firmware update to PCAN router pro FD via pcan dev pack debug apater

The Steps are clear explained - normally if you follow exact our steps you end up in debuging your code. The *.json files are all OK - look exactly as it must. So no problem from this side. For me it looks as you have make a mistake in installing the external debugger or wrong cable connection. Doub...
by U.Wilhelm
Tue 25. Jun 2024, 13:22
Forum: PCAN-Router Pro FD
Topic: Firmware update to PCAN router pro FD via pcan dev pack debug apater
Replies: 21
Views: 713

Re: Firmware update to PCAN router pro FD via pcan dev pack debug apater

Here how it MUST look like - works perfect
cable_debug_router_pro_fd.jpg
cable_debug_router_pro_fd.jpg (58.79 KiB) Viewed 265 times
Thats how the Debugger itself must start
Screenshot 2024-06-25 132025.jpg
Screenshot 2024-06-25 132025.jpg (197.07 KiB) Viewed 265 times