Search found 1326 matches

by U.Wilhelm
Thu 30. Jun 2022, 07:36
Forum: PCAN-Router FD
Topic: Router overloaded?
Replies: 2
Views: 76

Re: Router overloaded?

If you convert from CAN FD to a CAN2.0a/b Network, it is up to you to check if the CAN 2.0a/b Network could even handle the messageflow (Network Management) We could not do this for you, as we do not know what exact happend on both sides of your CAN Networks, which CAN Frames and which real Busload ...
by U.Wilhelm
Wed 29. Jun 2022, 09:54
Forum: PCAN-Router FD
Topic: Usage of second argument to the CAN_FilerAdd function
Replies: 2
Views: 33

Re: Usage of second argument to the CAN_FilerAdd function

The "extended" parameter is not yet implemented - so it does not care which value you use in the function. See can.h not used yet, 29 bit IDs received always //! @brief //! This function adds CAN-IDs to the filter. //! //! @param hBus handle for CAN bus, see CAN_BUS... //! @param extended not used y...
by U.Wilhelm
Wed 29. Jun 2022, 09:25
Forum: PCAN-Router FD
Topic: Flashjing PCAN return a wrong status Hardware
Replies: 1
Views: 35

Re: Flashjing PCAN return a wrong status Hardware

If you change make file / code samples etc. we are not able to do any support without having the complete, ready to compile, project. Please use the CPP sample project as template if you want to use the CPP extension. This sample ist tested and work fine! ..\Hardware\PCAN-Router_FD\Examples\14_CPLUS...
by U.Wilhelm
Wed 15. Jun 2022, 08:38
Forum: PCAN-Router
Topic: How to debug the code with Visual Studio Code
Replies: 1
Views: 128

Re: How to debug the code with Visual Studio Code

As your Firmware run on the module - you need a JTAG Debug Interface - Otherwise, how should the Debugger communicate with the Hardware :?: We do not offer for the older PCAN-Router offiziell support for Debugging. For the PCAN-Router FD and other new devices, there is also a official supported Debu...
by U.Wilhelm
Mon 13. Jun 2022, 08:43
Forum: Software
Topic: About PCAN-view software
Replies: 9
Views: 1343

Re: About PCAN-view software

Looks like you have no 2nd active node with the same Bitrate attached. Again here the absoluter basics for running a CAN Bus Termination must fit (120 Ohm on each end - in Sum ~60Ohm - simply measuure when Network ist down!) CAN always need 2 active CAN nodes - otherwise you could not send any frame...
by U.Wilhelm
Fri 10. Jun 2022, 10:04
Forum: Linux
Topic: CAN reader with GUI? (Raspbian)
Replies: 5
Views: 357

Re: CAN reader with GUI? (Raspbian)

If you use our CharDev Linux Driver on your RPI4 with the PCAN-USB, you could use the PCAN-View for Linux :-)
Please check this page
by U.Wilhelm
Tue 7. Jun 2022, 12:23
Forum: Linux
Topic: Using PCAN-USB Pro FD with LIN in Linux
Replies: 7
Views: 1976

Re: Using PCAN-USB Pro FD with LIN in Linux

As soon as we have more customer feedback we will build the release - after that it will be available also via a WEB Link.
by U.Wilhelm
Mon 30. May 2022, 09:06
Forum: PCAN-Explorer 6 & Add-ins
Topic: Access InstrumentsPanel from .pem-script - Solved
Replies: 1
Views: 118

Re: Access InstrumentsPanel from .pem-script

If you already have created a Panel, you need to get the reference to this panel and then you can add / change / control items for this panel. Here some simple samples, which shows how to use the Panel from VBS Shows the Value from a exsiting ValueEdit: Sub ValueEditCommand() Dim panel, valEdit Set ...
by U.Wilhelm
Fri 27. May 2022, 16:28
Forum: PCAN-Explorer 6 & Add-ins
Topic: Send message with DLC=0 by Button in Panel
Replies: 5
Views: 663

Re: Send message with DLC=0 by Button in Panel

When using a real *.pem (Visual Basic Script based Macro) you simply use the defined Symbol, as shown in the sample from Karlheinz, and use the signalname .Value method. FormatVersion=6.0 // Do not edit this line! Title="Untitled" {SIGNALS} Sig="Dummy-Signal" unsigned 1 {SENDRECEIVE} ["Zero-Byte-Sym...