PEAK-System Forum

Yes, that i spossible. If you only have 2 seperate CAN Neztworks, the smaller PCAN Router or PCAN-Router FD could also be used.

Please send your configuraton file and the Info from your post to support[at]peak-system.com

PCIe GEN1

Thats wrong ! Understood that I cannot use with PCAN-USB ( IPEH-002021 ) The PCAN-USB is used to send the Configuration via CAN to the Target. The PPCAN Editor use the PCAN-USB as the Flash Tool. But the PCAN-USB could never beeen the Target for PPCAN-Editor 2 Configuration. How should this go? It i...

Thanks for the feedback!
See our first answer - Checklist -

You need to calculate the Bitrate Setting for the PEAK-System Hardware so that it fit to the used board.
Which Sample Point does your board use ? This is very importend to know.
Simply use our Bitrate Calculation Tool to evaluate the best Setting ( link )

Also a solution!

You mix up 32/64 Bit DLLs. Search on your PC in all folders the file "pcanbasic.dll " - delete them all. Run the Setup again as my colleauge wrote in the last post - select PCANBasic API. If you want to understand read this: https://forum.peak-system.com/viewtopic.php?f=116&t=886 and https://forum.p...

If you talk about our PCAN-View Software Tool, you could setup here a CAN Frame - not more not less! CAN Frames transmit the in a fixed order Data Bytes (DataByte 0 to max. Data Byte 7 on CAN2.0a/b, and up to DB63 on CAN-FD) - called Data frame How your used high layer protocoll use this Databytes i...

The QZSS ist the same as the GPS. But as we wrote, if the QZSS/GPS is activ, the GLONASS will not work and vice versa. (this is limited by the used u-blox modul type - other u-blox receivers could also handle both at the same time) See document of the u-blox module we use ( MAX-7) 1.5.3 QZSS The Qua...