Search found 1316 matches

by U.Wilhelm
Tue 24. May 2022, 13:14
Forum: PCAN-Diag FD
Topic: Settings for tracing messages
Replies: 2
Views: 12

Re: Settings for tracing messages

Tracer settings are not saved for each project. They are set to the default values when you switch to another project. If you always use the same project, the values for that session will be saved temporarily until you change the project again. We will changes this in the near future. The Settings i...
by U.Wilhelm
Mon 23. May 2022, 11:16
Forum: PCAN-USB Pro FD
Topic: Update PCAN-USB Pro FD from Firmware Version 1.x or 2.x to 3.x
Replies: 0
Views: 8

Update PCAN-USB Pro FD from Firmware Version 1.x or 2.x to 3.x

If you own a first Generation PCAN-USB Pro FD and like to use the latest Firmware 3.x, you need to be sure that you bring your system up to date with some special Tools. Since Firmware 3.x we have add a new Bootloader and you could update your PCAN-USB Pro FD very simple with our PEAK-Flash Tool -->...
by U.Wilhelm
Fri 20. May 2022, 09:32
Forum: Software
Topic: Wrong scaling of bit-variables in plotter?
Replies: 2
Views: 42

Re: Wrong scaling of bit-variables in plotter?

Please use the Option on the TAB Digital to set Values for the Digital Signal.
by U.Wilhelm
Tue 17. May 2022, 12:03
Forum: PCAN-USB
Topic: Data receiving is getting stopped
Replies: 5
Views: 77

Re: Data receiving is getting stopped

Driver is up to date - but please answer the other questions.

- Check Termination (MUST be ~60 Ohm between CAN-H and CAN-L when System is powered off)
- Run the Tracer with all Error Flags settings set as Michael told you
by U.Wilhelm
Tue 10. May 2022, 08:04
Forum: Software
Topic: Driver compatibility windows XP / windows 10
Replies: 1
Views: 80

Re: Driver compatibility windows XP / windows 10

Please use the latest Version of the PCAN-Light (link) and also the latest driver.All the needed files are still available on the WEB Page. See support section.
by U.Wilhelm
Mon 9. May 2022, 12:26
Forum: PCAN-Explorer 6 & Add-ins
Topic: Symbol files
Replies: 1
Views: 47

Re: Symbol files

when using the PE6 you could always use one single symbol file with one connection . If your single physical bus include sinals from more as one symbol file you could: merge the files manually (but as you wrote - more workload every time a symbol file get a update ) use multible connections to the s...
by U.Wilhelm
Mon 9. May 2022, 08:26
Forum: PCAN-PCI Express
Topic: Initialization Error using PCAN-PCI Express
Replies: 2
Views: 96

Re: Initialization Error using PCAN-PCI Express

Which Linux Driver do you use ? If you want to run the PCAN-Basic API, you need to use the CharDev Driver.
by U.Wilhelm
Mon 9. May 2022, 08:25
Forum: Hardware
Topic: PCAN-M.2 with usb-c M.2 adapter?
Replies: 1
Views: 426

Re: PCAN-M.2 with usb-c M.2 adapter?

our M.2 cards use the PCIe Lanes and NOT the USB Lanes. So - no you could not use the USB to M.2 Adapter with M.2 cards type: 2280/2260-B-M
For USB you better use the PCAN-USB Interfaces (CAN2.0a/b or CAN2.0a/B & CAN-FD)
by U.Wilhelm
Thu 5. May 2022, 15:57
Forum: Linux
Topic: frame padding c++ example
Replies: 5
Views: 249

Re: frame padding c++ example

When you read or write a CAN Frame from the PCAN-Basic API, you always have to check: - return value of the read / write Function - must be CAN_ERROR_OK - the Message Type must be corect (sending) or must be checked (reading) - The DLC or LEN (DLC is not the same as LEN when using CAN-FD !! See Docu...
by U.Wilhelm
Thu 5. May 2022, 11:00
Forum: Linux
Topic: frame padding c++ example
Replies: 5
Views: 249

Re: frame padding c++ example

Sorry - but we do not know what you are talking about...

- Which API
- Which Function

A CAN Frame do not look like you descripe. A CAN Frame have a ID, MsgType, DLC/LEN, and some Databytes (or none)
If you want support - aks in a way that all understand what you exact talking about