PEAK-System Forum

I was not aware that the example in PCANBasic contains a whole GUI. It works for me just fine. Thanks!

The pcan-view (pcanview-ncurses) receive tab does not seem to allow sorting by "Rx CAN-ID" column (or by any other column for that matter) and there is no way that I know to just filter the messages I'm interested in. My system has dozens of different messages, making it very difficult to watch the ...

Hi Marvin, Thanks for the explanation. It didn't use to be like that... I used to have both network device can0 and pcan installed. It did cause one problem - if can0 was up then pcanview will notice that it is in use and not allow me to modify setup (such as turning listen-only option on). Maybe th...

I'm using PCAN-USB device with the Linux version of pcan-view and it works fine, but if I try instead to use candump (from can-utils) is claims there is no can0 device. I've checked with ifconfig and with "ip link ls" and there is really no can0 device. I'm using: Ubuntu 20.04 peak-linux-driver-8.18...

Thanks, it works!

Freddy

The PCAN-View I've installed from the provided link shows version 0.9.3-2-gd2f361a and not 0.9.3-53-g5adad75 (as in your post). Just to be sure I removed and reinstalled. uname -a: dcval@dcval-NT2-HP-Z4-G4-Workstation:~/Downloads$ uname -a Linux dcval-NT2-HP-Z4-G4-Workstation 5.15.0-113-generic #123...

I've moved my setup to a new system and the Listen Only mode does not seem to work any more. I'm using Ubuntu 20.04 with peak-system USB adapter. The driver version is v8.18.0 and the PCAN-View version is v0.9.3-2-gd2f361a. Without Listen Only option the PCAN-View transmits and traces the messages o...

Thanks! It works beautifully!

Freddy

Hi Michael, I am using PEAK PCAN-USB adapter. The driver version is 8.15.2 (peak-linux-driver). The pcanview is version "PCANView v0.9.3-2-gd2f361a for pcan driver >= v8.x". There are a few devices on the bus sending, terminating, and receiving messages. The system is working. I want to use the pcan...

I'm running pcanview on Ubuntu 20.04. When I run it without "listen only mode", with a pcanview.xmt file (with a couple of messages), it works just fine. But - if I enable in settings (during startup) the listen-only mode, with a different device generating messages, the Rx windows remains empty. Wh...