PEAK-System Forum

Sorry, but we have no examples on this except for the small one delivered with the API.

Hello,

The PCAN-XCP API provides a function for every available XCP command. The best way to familiarize yourself with XCP is to read the corresponding ASAM specification. Each command is described in detail, and examples of positive and negative responses are provided for each of them. The ...

Hello,

glad to see you have found what you needed. All this information is in the documentation. It is easier looking at it first, before looking the code. Closed.

Hello,

please check whther you are using the channel already with PCAN-View using a different bit rate value than the one used within your code. Moreover, please show your code of how you are checking the status and then how you are trying to connect it.

Thanks,

Hello,

the device ID is something "not unique" that can be set as the user needs. If you set the same ID to all your devic, then you will get also this information using the getavailableHardware function. You can change the device ID using either the PEAK Settings applet or the PCAn-View. here a ...

Hello,

the PCAN Net Configuration tool does show the handle of any registered net. See picture:

Hello,

ok, this is what I stated in my last post:

it looks like you would use the value of the event handle and not a reference to it


But, I cannot understand from your code if it is working now or not? despite of this, please note, that what the function expects is a "buffer", meaning, the ...

Hello,

as we (still) do not work or know Rust programming, it is difficult to say something about the construtct of your code, but for us it looks like you would use the value of the event handle and not a reference to it.

Additionally, an ERROR_UNKNOWN is normally returned, when an internal ...

Hello,

Please note that the value 25700 is not a valid PGN value, as for messages in PDU1 format, the lower byte of the PGN value must be 0 ( XX00h ). This is because this byte is filled by the destination address.

Please refer to the J1939 specifications, especially the message format and usage ...

Hello,

you are welcome.