PEAK-System Forum

Hi,

your config looks ok, and I am able to see the CAN messages in PCAN-View. Please check that you use a terminated CAN cable between PCAN-LIN and PCAN-USB (120 Ohms on both ends), and that you have set the baudrate in PCAN-View to 500k.

regards

Michael

Hi, all used files are ok. The timestamps in our drivers are based on the PerformanceCounter of Windows. So if this internal Windows timer will provide such a strange timestamp value, it will also be available in our driver. We have seen this only a few times before, but we are not sure how this hap...

Hi,

please provide some more details:

- which PCAN-USB Version (serial number) is in use?
- which firmware version?
- which driver version?
- please disconnect the PCAN-USB device, restart Windows, and connect it again.

regards

Michael

Hello,

we (PEAK) don't offer any example code for RP1210. Please contact TMC (Technology & Maintenance Council), who is the maintainer of this API to get more details on how to use that API.

regards

Michael

Hi,

please enable the error forwarding in the LIN Section for RS232, or send us your PCAN-LIN CT configuration file.

regards

Michael

Hi, attached you will find a pdf document showing you typical LIN applications, which you can handle with the PCAN-LIN module: - Using PCAN-LIN as LIN/CAN/Serial gateway as a simple LIN listener. - Using PCAN-LIN as LIN Master using the internal Scheduler of PCAN-LIN. - Using PCAN-LIN as LIN Master ...

Hello,

please send an email to our support address with the serial number of your PCAN-Explorer license. We have some macro examples available which we can send you by email.

regards

Michael

Hello Riccardo, the optional available PCAN-Explorer 6 with Plotter Add-In will be the right tool for your application. Please see our website for more details: https://www.peak-system.com/PCAN-Explorer-6.415.0.html?&L=1 https://www.peak-system.com/PE6-Plotter-Add-in-6.417.0.html?&L=1 We also offer ...

Hello Hareeshj,

yes, this is ok.

regards

Michael

Hi,

with the given info, we can't help you. Please provide the ldf of your system and the configuration of your PCAN-LIN module, to see if the configurations fits to your LIN device.

regards

Michael