PEAK-System Forum

Hi,

please send a photo of the adapter showing the serial number to our support email address, to see which hardware you are using.

regards

Michael

Hi,

please post the output of cat /proc/pcan before and after the reading stops. Can you please show a photo of the used PCAN hardware, to see which version you are using?

regards

Michael

Hello Mike, yes, when using the PCANBasic API with your application, the network name is fixed to PCANLight_USB_XX. But you can connect PCAN-Explorer to that network, after your application was started. This is a restriction of the free available PCANBasic API. With the optional available PCAN-Devel...

Hello, yes, it is also possible to enable the termination on the card, however, you have to solder on the card which need some good soldering experiences. We recommend to use external termination resistors in the CAN cables, like we offer here: https://www.peak-system.com/PCAN-Term.270.0.html?&L=1 r...

Hello,

the timestamps of a PCAN-USB FD will also be generated on the hardware. So if you use the PCAN-USB FD as an external CAN sniffer, there are no disadvantages against a PCIe card

regards

Michael

Hello, please use an external termination resistor to terminate your CAN bus system correctly. Next, please check the used bitrate settings again, they must fit exactly to your settings of your motor driver. As a test, please connect two channels of the PCAN M.2 card with a terminated CAN cable and ...

Hi, as a first step, please check that you use the latest available dll files for PCANBasic, PCAN-ISO-TP and PCAN-UDS. You can use the sysinfo tool to check your system, and send the result to our support email address so that we can have a look on your system: https://www.peak-system.com/fileadmin/...

Hello, yes, PLIN-View Pro don't show wrong PID frames (there is a filter inplemented). However, if you use our PLIN-API you will get a kind of LIN error frame, which will show you that there is a wrong PID used: PLIN-API-Example.JPG So you will see the frame as an error frame, but with no ID or data...

Double post, see answer here: viewtopic.php?f=45&t=7894#p20720

Hi,

you can run a VBscript to start and stop a scheduler in PLIN-View Pro. See Help->VBScript Support for more details. But it is not possible to stop the scheduler by LIN data with PLIN-View Pro. For such an use case you have to write an own application using the PLIN-API.

regards

Michael