PEAK-System Forum

Hello,

we received some support requests regarding an issue with the 3rd party software Ligier G499Diag Software, which shows the following error message:

Ligier_G499Diag.exe.jpg

To fix the issue, please install the latest PCAN-PassThru drivers from our website and restart your Windows once ...

Hello,

we received some support requests regarding an issue that the Bosch Rexroth BODAS software won't work on systems on which the latest PEAK-Driver 5.x are installed.
There is an error dialog displayed which tells you "Driver version not supported (needs 3.x):

Bodas.jpg

In that case ...

Hi,

which version of the PCANBasic API and driver do you use?

regards

Michael

Hi,

please do the following steps:

make clean
make
sudo make install
cat /proc/pcan

and send us the output of all commands to see if there are any problems.

regards

Michael

Hi,

you can define in PEAK-Settings which of the 6 channels should be used for RP1210. What kind of tool do you use which doesn't work? Please also check that you have installed the latest driver setup with RP1210 option from our support website.

regards

Michael

Hi John,

yes, good solution

regards

Michael

Hi,

if you run the driver in NetDev mode, you can't use the tools from the test directory. Those tools will only work with the chardev driver. Please install can-utils, to have the test tools for SocketCAN/NetDev available (candump, cansend, cansniffer ...)

regards

Michael

Hi,

please check with your IT if you are able to read/write to USB flash devices.

regards

Michael

Hi,

please start PEAK-Flash as administrator. On some systems, the standard user have no access to USB drives (MSD), which is used during the update process of the PCAN-USB.

regards

Michael

Hi,

which API and version do you use?

regards

Michael