Search found 166 matches

by G.Lang
Wed 19. Feb 2025, 08:48
Forum: PCAN-Basic
Topic: Not working PC even copy PCANBasic.dll
Replies: 10
Views: 6871

Re: Not working PC even copy PCANBasic.dll

We don´t know the "sysma tool" (a third party tool) and therefore we don´t tested our hardware with this software. Furthermore it´s also not possible to test our devices with all CAN software on the market. Please send us an email, referr to this forum thread and then we can at least check the used ...
by G.Lang
Tue 4. Feb 2025, 14:27
Forum: PCAN-RS-232
Topic: No data with default firmware!
Replies: 2
Views: 2745

Re: No data with default firmware!

Hi Martin,, the devices serial defaultspeed is 57600 and the default CAN speed is 125kbit/s -> see manual. default.png As a first step please try to establish a serial communication, in the example below i use the freeware "Hterm" rs232_default values.png Please check the connection by pressing the ...
by G.Lang
Tue 5. Nov 2024, 14:14
Forum: PCAN-MiniDisplay
Topic: Clarification on PCAN-MiniDisplay Script Behavior with CAN ID Mismatch (0x600 vs 0x621)
Replies: 1
Views: 8570

Re: Clarification on PCAN-MiniDisplay Script Behavior with CAN ID Mismatch (0x600 vs 0x621)

Hi,

what´s the PCAN-MiniDisplays firmware version?
Is this an original "PEAK example" or did you modified it?
Please send the complete project to "info@peak-system.com" and refere to this forum entry.

Thanks
Gunther
by G.Lang
Wed 29. May 2024, 10:34
Forum: Software
Topic: Unable understanding if Analog1 module is working or not
Replies: 2
Views: 1230

Re: Unable understanding if Analog1 module is working or not

Hi,

no idea, what´s wrong on your side but your config is working@500k. Maybe you don´t have transferred the config correctly into the module, or you have selected a wrong baudrate or your are using filters.

micromod-analog1-FD.png
micromod-analog1-FD.png (48.58 KiB) Viewed 1224 times
by G.Lang
Fri 8. Mar 2024, 08:51
Forum: Linux
Topic: WSL2: Using a PCAN-USB possible?
Replies: 1
Views: 1660

Re: WSL2: Using a PCAN-USB possible?

See here: viewtopic.php?f=59&t=7303#p18245

pcan_usb_wsl_2.jpg
pcan_usb_wsl_2.jpg (396.96 KiB) Viewed 1653 times

BTW: PEAK can´t guarantee the proper working, if it will work -> fine, if not -> bad luck and try a VM instead.
by G.Lang
Fri 1. Mar 2024, 12:37
Forum: PCAN-Router Pro FD
Topic: Wake-up function
Replies: 7
Views: 2921

Re: Wake-up function

Dear Henrik, do you use an own firmware or the routers standard logger firmware? If you use the standard firmware than, generally you can choose between 3 options to power down the device., please take a look inside the config.txt *********************************************************************...
by G.Lang
Wed 28. Feb 2024, 07:06
Forum: Linux
Topic: PCAN-Linux: Permanent assignment of canx (PCAN-USB)
Replies: 1
Views: 1229

Re: PCAN-USB netdev/usb

Hi, if you are using the kernel integrated netdev driver (SocketCAN) and you use a kernel 6.3 or higher then you can fix the canX names via the following instructions : https://www.peak-system.com/fileadmin/media/linux/index.htm canX_naming_kernel_6_3.jpg If you use our proprietary netdev driver the...
by G.Lang
Tue 27. Feb 2024, 13:33
Forum: PCAN-M.2
Topic: 4 channel CAN-FD logger with Raspi5
Replies: 22
Views: 7296

Re: 4 channel CAN-FD logger with Raspi5

Did you use a Debian 11 or a Debian 12?
I made all tests with Raspbian based on Debian 12 (bookworm)
by G.Lang
Tue 27. Feb 2024, 13:19
Forum: PCAN-M.2
Topic: 4 channel CAN-FD logger with Raspi5
Replies: 22
Views: 7296

Re: 4 channel CAN-FD logger with Raspi5

Hi,

the green "PWR" LED is on, the "ACK" is off.
by G.Lang
Tue 27. Feb 2024, 12:52
Forum: PCAN-M.2
Topic: 4 channel CAN-FD logger with Raspi5
Replies: 22
Views: 7296

Re: 4 channel CAN-FD logger with Raspi5

Hi, our RPI5 settings are identical....hm..curious. I don´t use the additional 5V supply, below a picture which shows the cabling. pi5_with_m2.jpg Please switch into the PEAK-Linux driver directory and do the following -> sudo make uninstall -> make clean -> make -> sudo make install -> sudo modprob...