Search found 146 matches

by G.Lang
Thu 17. Mar 2022, 09:58
Forum: PCAN-Ethernet Gateway DR
Topic: PCAN losing all data on the routing table
Replies: 1
Views: 320

Re: PCAN losing all data on the routing table

Hi, do you use a PCAN-Ethernet-Gateway or a PCAN-Ethernet-Gateway FD DR? Please send us the serial number of the device (can be found on the sticker and start with IPEH-xxxxxx-xxxxxx) and also the used firmware version. Please send the infos to our global support address info@peak-system.com and ref...
by G.Lang
Tue 3. Aug 2021, 08:26
Forum: PCAN-Router Pro
Topic: 29bit filter with data logging
Replies: 7
Views: 2437

Re: 29bit filter with data logging

Hi,

with an own firmware you can filter 29bit messages, it´s not a limitation of the PCAN-Router PRO itself.
It´s a limitation of the PCAN-Router PROs default-firmware + PPCAN-Editor.

best regards
Gunther
by G.Lang
Mon 2. Aug 2021, 16:19
Forum: PCAN-Router Pro
Topic: 29bit filter with data logging
Replies: 7
Views: 2437

Re: 29bit filter with data logging

Hi, if you want to forward all 29bit messages then you can use the "Routing x to y All" command (with value 2 -> bit 2 is set) 29bit-forwarding.jpg If you want to forward only some 29bit IDs then this can be realized via "4.7 Exercise 3b: Translating a CAN ID" and "4.8 Exercise 3c: (Variation 3b)Tra...
by G.Lang
Tue 1. Jun 2021, 15:10
Forum: Hardware
Topic: PCAN USB IPEH-002021 repair
Replies: 2
Views: 2517

Re: PCAN USB IPEH-002021 repair

Hello Alejandro,

please send us an email to the following address: info@peak-system.com

best regards
Gunther
by G.Lang
Fri 14. May 2021, 15:43
Forum: Hardware
Topic: Busheavy with terminated bus
Replies: 8
Views: 3579

Re: Busheavy with terminated bus

Hi,

nothing is wrong, that´s a normal CAN behaviour if there´s no second CAN node available who acknowlegde the transmitted CAN data.

best regards
Gunther
by G.Lang
Wed 5. May 2021, 08:10
Forum: PCAN-USB
Topic: PCAN-USB does not power the bus converter
Replies: 2
Views: 1139

Re: PCAN-USB does not power the bus converter

Hi,

as default the +5V are not active. To enable the +5V at pin 1 please take a look into the PCAN-USB manual -> chapter "3.2 Voltage Supply of External Devices".

Kind regards
Gunther
by G.Lang
Tue 4. May 2021, 10:52
Forum: PCAN-Router Pro
Topic: Sleep after a few seconds without Messages
Replies: 1
Views: 738

Re: Sleep after a few seconds without Messages

Hi Joel,

please take a look at exercise 7 at page 62 inside the "PPCAN-Editor configuration tutorial for PCAN-MIO", this exercise will also work for the PCAN-Router Pro.

sleep-mode-mio-routerpro.jpg
sleep-mode-mio-routerpro.jpg (170.63 KiB) Viewed 721 times

regards
Gunther
by G.Lang
Fri 4. Oct 2019, 11:32
Forum: PCAN-USB FD
Topic: CAN FD work do not work IDs bigger then 7FF
Replies: 1
Views: 2079

Re: CAN FD work do not work IDs bigger then 7FF

Hi,

please use both message types

#define PCAN_MESSAGE_EXTENDED 0x02U // The PCAN message is a CAN Extended Frame (29-bit identifier)
#define PCAN_MESSAGE_FD 0x04U // The PCAN message represents a FD frame in terms of CiA Specs
pcanbasic_help.png
pcanbasic_help.png (90 KiB) Viewed 2074 times
regards
Gunther
by G.Lang
Fri 31. May 2019, 11:01
Forum: PCAN-LIN
Topic: Reading LIN information in Chevrolet car
Replies: 1
Views: 2000

Re: Reading LIN information in Chevrolet car

Hi Brian,

we don´t know the LIN bit rate of your GM car. LIN is a little different than CAN, you must also set the correct LIN format, the matching bit length and "Subscriber" as direction. Please also take care that the "Forward Mask" is set to RS-232.
LIN.JPG
LIN.JPG (174.78 KiB) Viewed 1990 times
regards
Gunther
by G.Lang
Wed 8. May 2019, 13:48
Forum: PCAN-MicroMod Motherboards
Topic: PWM Ausgang konfigurieren
Replies: 6
Views: 3657

Re: PWM Ausgang konfigurieren

Hallo, bei dem "PWM + Frequency Output" handelt es sich bei der MicroMod Mix2 um die analogen Ausgänge AOut 0 und AOut 1. pwm_out.JPG Output 0 beim "PWM + Frequency Output" ist der 0...10V Spannungsausgang AOut 0 Output 2 beim "PWM + Frequency Output" ist der 0...20mA Stromausgang AOut 1 Mit freundl...