Search found 287 matches

by M.Heidemann
Thu 1. Oct 2020, 09:10
Forum: PCAN-View
Topic: PCAN-View weird transmit issue
Replies: 8
Views: 360

Re: PCAN-View weird transmit issue

Hello, To assess this issue, please try the following: Make sure that with your devices both CAN-FD Timings match exactly . Make sure both device use the same BRP, TSEG1, TSEG2, SJW and are operating at the same sample point, both for Nominal and Data-phases. CAN-FD is dependent on both devices havi...
by M.Heidemann
Wed 30. Sep 2020, 16:35
Forum: Linux
Topic: Can_GetValue & Can_SetValue
Replies: 3
Views: 540

Re: Can_GetValue & Can_SetValue

Hello,

This beheaviour is fixed in a prerelease version of PCAN-Basic,
which we could send you.

Please contact us at support[at]peak-system.com

Best Regards

Marvin
by M.Heidemann
Mon 28. Sep 2020, 15:10
Forum: PCAN-Router Pro
Topic: Tracing only few CAN variables value out of many
Replies: 1
Views: 166

Re: Tracing only few CAN variables value out of many

Hello, This is not possible with the PCAN-Router Pro as our trace format is message-based, not signal-based. If you only want to log certain signals out of a message, you will have to implement your own application to do so, for example using PCANBasic or using a VBScript macro in PCAN-Explorer 6. F...
by M.Heidemann
Mon 28. Sep 2020, 11:00
Forum: Linux
Topic: Can_GetValue & Can_SetValue
Replies: 3
Views: 540

Re: Can_GetValue & Can_SetValue

Hello,

Thank your for your request.

Are you using a VM to test this?


Best Regards

Marvin
by M.Heidemann
Mon 28. Sep 2020, 08:50
Forum: PCAN-Ethernet Gateway DR
Topic: ENET/Open SSH Unix by sending SEED and Key - Project
Replies: 1
Views: 203

Re: ENET/Open SSH Unix by sending SEED and Key - Project

Hello,

This is a forum for PEAK-products.

We cannot give you any information regarding this.

You might want to inquire in another CAN-related forum regarding this.

Best Regards

Marvin

-closed-
by M.Heidemann
Fri 25. Sep 2020, 13:24
Forum: PCAN-PCI Express
Topic: initialization of PCIe card fails.
Replies: 1
Views: 122

Re: initialization of PCIe card fails.

Hello, Please check if the transceiver of your PCAN-PCIe might is defective, as described in this forum post by my colleague G.Lang: https://forum.peak-system.com/viewtopic.php?f=120&t=52 Furthermore check the termination on your CAN-bus, which should be 120 Oms at both ends of the bus respectively....
by M.Heidemann
Wed 23. Sep 2020, 08:03
Forum: Hardware
Topic: PCAN-USB BUS-OFF when communicate with TCAN1042
Replies: 7
Views: 892

Re: PCAN-USB BUS-OFF when communicate with TCAN1042

Hello,

You`re welcome.

We are glad you could resolve the issue.

Best Regards

Marvin

- closed -
by M.Heidemann
Tue 22. Sep 2020, 15:56
Forum: Hardware
Topic: PCAN-USB BUS-OFF when communicate with TCAN1042
Replies: 7
Views: 892

Re: PCAN-USB BUS-OFF when communicate with TCAN1042

Hi, Thank you for your quick reply. So, we did establish that the communication of the PCAN-USB itself works. The Bitrate still seems to be the issue here. There is more to CAN-Timing than the resulting speed (125Kbit/s). Most likely the 125Kbit/s CAN-Timing of your TCAN1042 does not match the 125Kb...
by M.Heidemann
Tue 22. Sep 2020, 15:16
Forum: Hardware
Topic: PCAN-USB BUS-OFF when communicate with TCAN1042
Replies: 7
Views: 892

Re: PCAN-USB BUS-OFF when communicate with TCAN1042

Hello, Can you please test the following, so we can assess the issue further? Use both your PCAN-USBs with PCAN-View at 125k and connect them to each other, make sure to use either terminated cable or a termination of 120 Ohms on both Bus-ends. Can you establish a communication between your PCAN-USB...
by M.Heidemann
Tue 22. Sep 2020, 12:14
Forum: Hardware
Topic: PCAN-USB BUS-OFF when communicate with TCAN1042
Replies: 7
Views: 892

Re: PCAN-USB BUS-OFF when communicate with TCAN1042

Hello,

This is possibly a bitrate mismatch,
please check the bit-timings of both your CAN-Nodes (PCAN-USB, TCAN1042) and see if
they match.

Please report back to me if this resolved the issue.

Best Regards

Marvin