PEAK-System Forum

Hello,

please export the following registry key [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\pcan_usb]
and send it to "info@peak-system.com", don´t forget to refer to this post in your email.

best regards
Gunther

Hi,

yes, this is possible.

best regards
Gunther

Hi, the Virtual PCAN-Gateway is just available for Windows opertings systems. If you want to operate via Linux with the PCAN-Ethernet-Gateway then it´s recommended to use ports. Please take a look inside the PCAN-Gateways-Developer-Documentation -> chapter 1.3 Communication between Gateway and PC vi...

Hello,

please tell me the serial number from the used CAN-interfaces or the exact type.

best regards
Gunther

Hello Archigos,

please update to firmware 2.6 and disable the "Listen-Only" mode at the sending unit.

best regards
Gunther

Hi, you can try the PCAN-OBD-II-Viewer http://www.peak-system.com/produktcd/ You can find it in the "Tools" directory. Maybe this software fullfill your requirements. Remarks -> Use the software as it is -> PEAK-System Technik don´t give any technical support for this software -> You use it on your ...

Hi Lukas, we are able to reproduce your problem, it´s an issue of the used transceiver module in combination with the used firmware which could happen under some circumstances :o Please contact us per email and we send you a new firmware + necessary tools/instructions for the update process. best re...

Hm..curios

please post a screenshot with the used version and PPCAN version information Furthermore press the right mouse button and read the current configuration from the module, save the config and post it also. regards
Gunther

Hello Lukas, you have set CAN 1 (and all the other CAN channels) in to the listen-only mode. This can be checked very easy. Please try to send the ID 0x7E7 with DLC=3 and 80 00 06 to CAN 1. If the module is working in the normal operating mode you get a response from the module with ID 0x7E7 detect_...

Hi Vikash,

the LabView drivers are fee required and can´t be downloaded for free.
Please take a look at the following URL:
https://www.peak-system.com/LabVIEW-Dri ... .html?&L=1


best regards
Gunther