Search found 139 matches

by G.Lang
Thu 30. Sep 2010, 09:21
Forum: PCAN-MicroMod Motherboards
Topic: PCAN MicroMod Mix 2 - Analogue Voltage Range
Replies: 15
Views: 12512

Re: PCAN MicroMod Mix 2 - Analogue Voltage Range

Hi,

that is not odd -> this is the difference between the tab "Function 0" and tab "Function 7". Please switch to the "Function 7" tab and you can also configure Dout7.
digital_functions.jpg
digital_functions.jpg (73.51 KiB) Viewed 5061 times
regards
Gunther
by G.Lang
Wed 29. Sep 2010, 11:37
Forum: PCAN-MicroMod Motherboards
Topic: MicroMod Mix2 Temperatuer sensor range
Replies: 2
Views: 3265

Re: MicroMod Mix2 Temperatuer sensor range

Hi Matt, it is possible to extend the temperature range from the NTC input . But for that we must know the new temperature range and you must change some SMD components on the pcb ( note : you loose the warranty). It is not possible (and not useful) to modify the PT1000 input to work with a PT100 se...
by G.Lang
Wed 29. Sep 2010, 09:49
Forum: PCAN-MicroMod Motherboards
Topic: PCAN MicroMod Mix 2 - Analogue Voltage Range
Replies: 15
Views: 12512

Re: PCAN MicroMod Mix 2 - Analogue Voltage Range

Dear Matt, strange, i my version 2.5.2.56 of the MicroMod configuration 2 software the Dout7 is available in the " Digital Function " window. Please take a look at the screenshot below: dout7_triggered_via_din0_din1.jpg When you set Din0 or Din1 to GND the LED goes on. Please send me your configurat...
by G.Lang
Tue 28. Sep 2010, 13:22
Forum: PCAN-MicroMod Motherboards
Topic: PCAN MicroMod Mix 2 - Analogue Voltage Range
Replies: 15
Views: 12512

Re: PCAN MicroMod Mix 2 - Analogue Voltage Range

Hi Matt, it looks that this is a software bug (fixed in the next release), sorry. The best way to fix this as soon as possible is to edit the right values directly in the registry (be careful). Close the PCAN-MicroMod configuration software and open the registry with " regedit " and set the values f...
by G.Lang
Tue 28. Sep 2010, 08:35
Forum: PCAN-miniPCI
Topic: Hardware buffer
Replies: 1
Views: 3130

Re: Hardware buffer

Hi,

the size of the hardware buffer from the PCAN-miniPCI (which uses a NXP SJA1000 CAN controller) is a 64-byte FIFO.

regards
Gunther
by G.Lang
Mon 27. Sep 2010, 15:28
Forum: PCAN-MicroMod Motherboards
Topic: PCAN MicroMod Mix 2 - Analogue Voltage Range
Replies: 15
Views: 12512

Re: PCAN MicroMod Mix 2 - Analogue Voltage Range

Matt,

you installed the version 1.3.11, please uninstall and use the version 2.5.2 instead.

please take a look a the pic below
version2_micromod_config_tool.jpg
version2_micromod_config_tool.jpg (198.05 KiB) Viewed 7402 times
regards
Gunther
by G.Lang
Mon 27. Sep 2010, 14:23
Forum: PCAN-MicroMod Motherboards
Topic: PCAN MicroMod Mix 2 - Analogue Voltage Range
Replies: 15
Views: 12512

Re: PCAN MicroMod Mix 2 - Analogue Voltage Range

Hi Matt, when you use the " PCAN-MicroMod configuration " tool version 2.5.2.56 and you select as used board type " PCAN-MicroMod Mix2 " then you are able to configure Dout0 and the LED via Dout7 in the digital output window. please take a look at the screenshot below dout0_and_dout7.jpg regards Gun...
by G.Lang
Mon 27. Sep 2010, 09:46
Forum: PCAN-MicroMod Motherboards
Topic: PCAN MicroMod Mix 2 - Analogue Voltage Range
Replies: 15
Views: 12512

Re: PCAN MicroMod Mix 2 - Analogue Voltage Range

Hi Matt,

which version of the "PCAN-MicroMod configuration" tool do you use?

regards
Gunther
by G.Lang
Thu 23. Sep 2010, 23:32
Forum: PCAN-MicroMod Motherboards
Topic: PCAN MicroMod Mix 2 - Analogue Voltage Range
Replies: 15
Views: 12512

Re: PCAN MicroMod Mix 2 - Analogue Voltage Range

Hi,

yes, you must add a resistor with 10K9 ohms for each Ain you want to use with a voltage range to 5V

For access to the led (Dout7) you must use the Dout7 from the"Digital Output" service -> please take a look at page 15 from the manual.

regards