Search found 1433 matches

by M.Maidhof
Mon 16. May 2022, 17:37
Forum: PCAN-USB
Topic: Data receiving is getting stopped
Replies: 5
Views: 74

Re: Data receiving is getting stopped

Hi, please check your CAN wiring for correct termination on both ends. Please enable the "log error frames" in the trace option, and log the data in a ring buffer, to see what is happening after 20 minutes. Please also provide details about driver version, PCANBasic is only the API, not the driver. ...
by M.Maidhof
Fri 13. May 2022, 12:18
Forum: PCAN-USB FD
Topic: Firmware problems?
Replies: 7
Views: 122

Re: Firmware problems?

Hi,

this looks like a hardware defect on the PCB. Please contact us by email using our support email address with the serialnumber of the device, to check the repair possibilities.

regards

Michael
by M.Maidhof
Fri 13. May 2022, 08:57
Forum: Linux
Topic: PCAN USB - receive no data on linux pc
Replies: 2
Views: 100

Re: PCAN USB - receive no data on linux pc

Hi Basti,

please see the following thread for the solution of your problem:

viewtopic.php?f=59&t=6971

regards

Michael
by M.Maidhof
Thu 12. May 2022, 17:47
Forum: PCAN-USB FD
Topic: Firmware problems?
Replies: 7
Views: 122

Re: Firmware problems?

Hi,

can you please send a messages with all data bytes set to 0xFF and 0x00? And also send data to the PCAN-USB with data bytes set to 0x00 and 0xFF?

regards

Michael
by M.Maidhof
Thu 12. May 2022, 16:53
Forum: PCAN-USB FD
Topic: Firmware problems?
Replies: 7
Views: 122

Re: Firmware problems?

Hi,

can you please also send a screenshot of PCAN-View, to see what you have sent and what was received on the other side?

regards

Michael
by M.Maidhof
Thu 12. May 2022, 14:54
Forum: PCAN-USB FD
Topic: Firmware problems?
Replies: 7
Views: 122

Re: Firmware problems?

Hello Henrik,

to check if the problem is linked to the PCAN-USB FD, please connect another PC CAN monitoring device to your CAN Bus system, and check the transmitted CAN frames from the PCAN-USB FD.

regards

Michael
by M.Maidhof
Thu 12. May 2022, 12:00
Forum: PCAN-USB
Topic: Data receiving is getting stopped
Replies: 5
Views: 74

Re: Data receiving is getting stopped

Hi,

please provide details about used OS, driver version and software which displays the data.

regards

Michael
by M.Maidhof
Thu 12. May 2022, 09:39
Forum: Linux
Topic: Device Stops Broadcasting After Certain Number of Messages
Replies: 2
Views: 122

Re: Device Stops Broadcasting After Certain Number of Messages

Hi, a CAN bus needs at least a second CAN node which will acknowledge the CAN frames on the physical layer of the CAN bus sytem. In your case you will generate acknowledge errors in the CAN controller, and the sender will stop transmitting new frames because the TX queues are full. Have a look on th...
by M.Maidhof
Mon 9. May 2022, 15:44
Forum: Linux
Topic: PEAK Usb not detected on Ubuntu 18.04LTS
Replies: 4
Views: 175

Re: PEAK Usb not detected on Ubuntu 18.04LTS

Hi,

looks like you did not load the driver after the build process with "sudo modprobe pcan"

regards

Michael
by M.Maidhof
Mon 9. May 2022, 10:40
Forum: Linux
Topic: Peak-linux-driver-8.14.0 not working
Replies: 9
Views: 353

Re: Peak-linux-driver-8.14.0 not working

Updating the PCAN-M.2 card to the latest firmware 3.5.6 did solve the issue in the 64bit ARM environment.

regards

Michael