GM DPS and PCAN-USB

This forum covers third party software that is for example developed with our APIs
Locked
G.Lang
Support
Support
Posts: 139
Joined: Wed 22. Sep 2010, 14:58

GM DPS and PCAN-USB

Post by G.Lang » Wed 6. Jul 2011, 13:39

Newer versions of the DPS tool (for example Development Programming System Version 4.23.0.0) are not able to work with a correct installed PCAN-USB adaptor :o . When starting the software and using "GM LAN CAN" as active protocol the "SAE J2534 Interface" is empty.
gm_dps_tool_without_installed_j2534_dll.jpg
gm_dps_tool_without_installed_j2534_dll.jpg (277.64 KiB) Viewed 15173 times
To fix this :D it´s necessary to install the "J2534 DLL". Please take a look at the hint in the DPSREADME.txt
Tech2 J2534 DLL is no longer installed as part of DPS. As is the case with all
other J2534 devices, this .dll must be installed via its own installation package.
To get the necessary PCANJ2534 setup files please send us an email with the subject "Request for PCANJ2534.DLL for DPS"to "support@peak-system.com" (please avoid emails from privat accounts, only company accounts are accepted) and we forward your request to the DPS guys from GM/OPEL. It´s also possible to send an email direct to the DPS team (dps.team@gm.com)

After the installation of the PCANJ2535 is done the PCAN-USB adaptor is available
gm_dps_tool_with_installed_j2534_dll.jpg
gm_dps_tool_with_installed_j2534_dll.jpg (280.69 KiB) Viewed 15173 times
regards
Gunther

samer.sameh
Posts: 1
Joined: Sun 23. Dec 2012, 11:08

How to use GM DPS Tool

Post by samer.sameh » Sun 23. Dec 2012, 11:12

I'm a beginner in using GM DPS tool, I knew that I must build a DPS archive. Plus having some files like UTILITY and TABLE files.

So, how can I generate those files? and what is the benefit of these files?

Thanks in advance ;

User avatar
U.Wilhelm
Sales & Support
Sales & Support
Posts: 1140
Joined: Fri 10. Sep 2010, 19:34

Re: GM DPS and PCAN-USB

Post by U.Wilhelm » Mon 24. Dec 2012, 13:01

Please contact the GM DPS Support. You get the support adress while you receive the software from GM.
--------------------------------
PEAK-System Technik
Technical Support Team
support@peak-system.com
-------------------------------

renzhanxin
Posts: 1
Joined: Sat 1. Jul 2017, 17:53

Re: How to use GM DPS Tool

Post by renzhanxin » Sat 1. Jul 2017, 18:12

samer.sameh wrote:I'm a beginner in using GM DPS tool, I knew that I must build a DPS archive. Plus having some files like UTILITY and TABLE files.

So, how can I generate those files? and what is the benefit of these files?

Thanks in advance ;
Why is my DPS write unsuccessful? The programming data shows where the last loop has not been completed.
Last edited by M.Gerber on Thu 20. Jul 2017, 09:57, edited 1 time in total.
Reason: Removed e-mail address for privacy reasons

User avatar
U.Wilhelm
Sales & Support
Sales & Support
Posts: 1140
Joined: Fri 10. Sep 2010, 19:34

Re: GM DPS and PCAN-USB

Post by U.Wilhelm » Mon 3. Jul 2017, 12:19

Please contact the GM DPS Support. You get the support adress while you receive the software from GM.
--------------------------------
PEAK-System Technik
Technical Support Team
support@peak-system.com
-------------------------------

Locked