PCAN Router Pro - Calculation of Mean Signal Values

This forum covers issues concerning multiple software products.
Post Reply
Shift
Posts: 1
Joined: Tue 6. Apr 2021, 08:20

PCAN Router Pro - Calculation of Mean Signal Values

Post by Shift » Tue 6. Apr 2021, 08:31

Hello everyone,

I currently have the problem with the PCAN Router Pro that a signal is sent every 10 ms on CAN 1, but it should only be sent every 100 ms on CAN 2 so that the bus is not blocked.
So that the measurement signals are not distorted, the mean value of the 10 previous received signals should be used every 100 ms.

Unfortunately, I can' t find a direct function for this in the PPCAN editor. Can anyone help me with this?

Thank you very much!

User avatar
U.Wilhelm
Sales & Support
Sales & Support
Posts: 1198
Joined: Fri 10. Sep 2010, 19:34

Re: PCAN Router Pro - Calculation of Mean Signal Values

Post by U.Wilhelm » Tue 6. Apr 2021, 11:48

Please send your configuraton file and the Info from your post to support[at]peak-system.com
--------------------------------
PEAK-System Technik
Technical Support Team
support@peak-system.com
-------------------------------

Post Reply