Hello,
I am new to the PCAN-USB_FD CAN Analyzer.
I am facing some difficulties in monitoring the CAN messages through PCAN-USB_FD
Attached the block diagram of the connections what I have done and error images what I am receiving.
Please any one can help me where I have gone wrong whether in connections or configurations.
Thank You
PCAN_USB_FD (Beginner)
-
- Posts: 1
- Joined: Tue 22. Oct 2024, 10:39
PCAN_USB_FD (Beginner)
- Attachments
-
- PEAK CAN Analyzer Connections.png (18.97 KiB) Viewed 293 times
-
- PEAK CAN Analyzer 2.png (364.22 KiB) Viewed 293 times
-
- PEAK CAN Analyzer 1.png (123.29 KiB) Viewed 293 times
-
- Sales & Support
- Posts: 1023
- Joined: Fri 20. Sep 2019, 13:31
Re: PCAN_USB_FD (Beginner)
Hello,
Several possible reasons:
1. Your Bitrate Speed is correct, but your Sample-Point is way off.
Please check if you need to use another sample point.
2. The RJ-45 to terminal adaptor causes these issues.
Maybe test with another Node.
BR
Marvin
Several possible reasons:
1. Your Bitrate Speed is correct, but your Sample-Point is way off.
Please check if you need to use another sample point.
2. The RJ-45 to terminal adaptor causes these issues.
Maybe test with another Node.
BR
Marvin
---
Marvin Heidemann
PEAK-Support Team
Marvin Heidemann
PEAK-Support Team