This forum covers issues concerning multiple hardware products.
- Posts: 1
- Joined: Thu 14. Nov 2019, 16:10
I am connecting directly PCan-USB adaptor to the subd9 connector in the only other node of the CAN network.
If there is not actually a bus cable, do I need to solder the pins inside the adaptor card?
- Posts: 1303
- Joined: Wed 22. Sep 2010, 14:00
yes, a CAN Bus system needs a termination. So when your other CAN node is not terminated, you have to implement a termination resistor in your CAN lines.