PCAN MIO: Characteristic Curve applicable to analog input?
PCAN MIO: Characteristic Curve applicable to analog input?
I would like some clarification about characteristic curves with PCAN MIO. The tutorial covers applying a characteristic curve to a received message. I want to apply a characteristic curve to an analogue input and then transmit the corrected value. As the measured value is transmitted and not received will it still apply the curve if I follow the tutorial and create a second message.
Re: PCAN MIO Characteristic Curve
Hi,
yes, that´s also possible. Below an example with doubles the analog input to the output
Configuration:
For more infos please take a look into the PCAN-MIO tutorials.
Regards
Gunther
yes, that´s also possible. Below an example with doubles the analog input to the output
Configuration:
For more infos please take a look into the PCAN-MIO tutorials.
Regards
Gunther
Re: PCAN MIO Characteristic Curve
Thanks. Excellent reply.
Kind Regards
Kind Regards
- PEAK-Support
- Sales & Support
- Posts: 1646
- Joined: Fri 10. Sep 2010, 19:34
Re: PCAN MIO Characteristic Curve
Topic closed
--------------------------------
PEAK-System Technik
Technical Support Team
support[at]peak-system.com
-------------------------------
PEAK-System Technik
Technical Support Team
support[at]peak-system.com
-------------------------------