some question about PassThru and CANFD

Pass-Thru API and connection of Pass-Thru software to PEAK CAN interfaces.
uaes_hhl
Posts: 6
Joined: Mon 15. Oct 2018, 08:04

Re: some question about PassThru and CANFD

Post by uaes_hhl » Sat 8. Dec 2018, 16:22

Hi, hello, thank you very much for your reply. Can the passthru interface be able to set prescaler, tseg1and2, sync jump width, or is there a way to directly set the bit rate and sample point by passthru interface?

K.Wagner
Software Development
Software Development
Posts: 757
Joined: Wed 22. Sep 2010, 13:36

Re: some question about PassThru and CANFD

Post by K.Wagner » Mon 10. Dec 2018, 09:50

Hello,

you can set the arbitration bitrate as a pair of BTR0/BTR1 values (WORD value) over the "BaudRate" parameter of the function PassThruConnect:
PassThruConnect(DeviceID, ProtocolID, Flags, BTR0BTR1, pChannelID).
Best regards,
Keneth

rr_iav
Posts: 6
Joined: Wed 15. Mar 2017, 16:50

Re: some question about PassThru and CANFD

Post by rr_iav » Wed 14. Aug 2019, 13:45

Dear Mr. Wagner
I am also interested in using a CAN-FD enabled PassThru device (Peak PCI FD in my case).
How can I obtain the PT dll for this purpose?
Thanks for you assistance.
Best regards

User avatar
U.Wilhelm
Sales & Support
Sales & Support
Posts: 1158
Joined: Fri 10. Sep 2010, 19:34

Re: some question about PassThru and CANFD

Post by U.Wilhelm » Wed 14. Aug 2019, 13:53

--------------------------------
PEAK-System Technik
Technical Support Team
support@peak-system.com
-------------------------------

Post Reply