RS232 settings for communication to PCAN-LIN

RS-232 to CAN/LIN Interface
Post Reply
R1MARC
Posts: 15
Joined: Tue 27. Nov 2018, 12:50

RS232 settings for communication to PCAN-LIN

Post by R1MARC » Tue 27. Nov 2018, 12:55

Hello,
what are the settings for a standard RS232 terminal communication with PCAN-LIN module?
documentation deals with 38400bauds (as default value) but nothingt about parity or data length.
Top
M.Maidhof
Support
Support
Posts: 1303
Joined: Wed 22. Sep 2010, 14:00

Re: RS232 settings for communication to PCAN-LIN

Post by M.Maidhof » Tue 27. Nov 2018, 13:21

Hi,

default values are: 38400,8,N,1

regards

Michael
Top
R1MARC
Posts: 15
Joined: Tue 27. Nov 2018, 12:50

Re: RS232 settings for communication to PCAN-LIN

Post by R1MARC » Tue 27. Nov 2018, 16:23

OK, I configure the terminal this way and have nothing displayed. :-(
Attachments
config_Master_Siège.pclin
configuration file of the module I'm connected to for RS232 spy function
(43.23 KiB) Downloaded 243 times
Top
M.Maidhof
Support
Support
Posts: 1303
Joined: Wed 22. Sep 2010, 14:00

Re: RS232 settings for communication to PCAN-LIN

Post by M.Maidhof » Tue 27. Nov 2018, 16:40

what do you like to see? You didn´t configure a LIN forwarding to RS232.
Top
R1MARC
Posts: 15
Joined: Tue 27. Nov 2018, 12:50

Re: RS232 settings for communication to PCAN-LIN

Post by R1MARC » Tue 27. Nov 2018, 17:03

Quite sur I did, but may be not saved the right way.
Now I've the configuration from attached picture and see, on "Messages and Scheduler" section, information. I continue setting my configuration. Thanks for your support.
Attachments
Capture.JPG
Capture.JPG (12.21 KiB) Viewed 1716 times
Top
Post Reply

Return to “PCAN-LIN”