PCAN-LIN configuration issue for a LIN slave configuration

RS-232 to CAN/LIN Interface
Post Reply
nbotta
Posts: 1
Joined: Wed 18. Sep 2019, 23:35

PCAN-LIN configuration issue for a LIN slave configuration

Post by nbotta » Wed 18. Sep 2019, 23:46

Hi,

We are having issues trying to configure PCAN-LIN( LIN to RS232) to listen to an automobile LIN bus. Previously used PLIN-USB with success so we are sure the LIN baudrate matches to the network.

Please find attached the error messages and config files used.
Attachments
Error messages in PCAN-LIN
Error messages in PCAN-LIN
plin_error_msg.JPG (40.15 KiB) Viewed 1020 times
TRIAL1.linproj
plin-usb file that we have had success in listening to the bus.
(3.89 KiB) Downloaded 88 times
plin_snooper_config.pclin
pcan-lin config
(42.28 KiB) Downloaded 84 times

M.Maidhof
Support
Support
Posts: 1303
Joined: Wed 22. Sep 2010, 14:00

Re: PCAN-LIN configuration issue for a LIN slave configurati

Post by M.Maidhof » Thu 19. Sep 2019, 09:09

Hi,

with PCAN-LIN you have to configure the LIN frames exactly to the length code and checksum type of your LIN system. Check your ldf or listen with PLIN-View Pro, which length and checksum type are used on your LIN system. Send a screenshot of PLIN-View Pro while you are listen to that LIN system, to be able to see the LIN configuration of each frame.

regards

Michael

Post Reply