I have built a sample program that has FATFS working in SDRAM, EEPROM and SPI_FLASH, but I now want to read the internal EMMC (and then the SDCARD).
To do this i need to talk to the SDCARD external, and the internal EMMC hardware pins, but can find no hardware definitions in the samples or help.
There is one mention for each which is the LED for SD1 and SD2.
do you have a sample doc or example code to talk to the SDCARD and EMMC?
Thanks
Greg.
SD1 and SD2 access.
-
M.Heidemann
- Sales & Support
- Posts: 425
- Joined: Fri 20. Sep 2019, 13:31
Re: SD1 and SD2 access.
Hello Greg,
We have not yet released examples for this but we are currently developing those examples which are currently in a Beta-state. If you are interested in getting the Beta-examples we currently have, please send us an email to support[at]peak-system.com
Please refer to this forum post.
Best Regards
Marvin
Edit: user contacted us via email
-closed-
We have not yet released examples for this but we are currently developing those examples which are currently in a Beta-state. If you are interested in getting the Beta-examples we currently have, please send us an email to support[at]peak-system.com
Please refer to this forum post.
Best Regards
Marvin
Edit: user contacted us via email
-closed-