PCAN_ERROR_ILLMODE

[Matthias]

Hello,
I have a problem concerning the following error code: Driver object state is wrong for the attempted operation (PCAN_ERROR_ILLMODE).
I am relatively new to programming so I don't know exactly wether this problem is due to any missing file/driver or an error in the code.
I am using the PCAN_USB and I used the attached code from the example of the documentation.
I would be grateful if someone could tell me what to do.

[M.Heidemann]

Hello,

Do you have the PCAN-Drivers including PCANBasic installed?

https://www.peak-system.com/quick/DrvSetup

peak-driver-setup.png (26.56 KiB) Viewed 2883 times

Please report back to us regarding this

Best Regards

Marvin

[Matthias]

Hello,

thank You for the fast reply.
Unfortunately this was not the issue, the drivers were already installed.
Are there perhaps any other possibilities for the upcoming error?

Best Regards

Matthias

[M.Heidemann]

Hello,

Please check the following:

- Do you have the device intialized with another software, for example PCAN-View?

- Do you have local PCANBasic DLLs? Does the behaviour also occur, when the local DLLs are removed?

Please report back to us regarding this.

Best Regards

Marvin

[Matthias]

Hello,

after deinstalling the drivers and reinstalling them again, and also after reincluding the dlls + restarting the PC, the error disappeard.

I am very grateful for your fast support.

Best Regards

Matthias

[cobra_ltc]

I ran into the exact situation. I'm not able to run PCANBasicExample.exe from either Win32 or x64 folders. I did try renaming the local PCANBasic.dll files, but the results were identical. I uninstalled/reinstalled the 4.2.3 PEAK-Drivers, but the results were the same. I didn't have any other software competing for the PCAN HW (USB) at the time I ran the test. I am able to use the PcanView, so I know the HW works.

I get the same error message whether the drivers are installed or not. SO, it appears that they are "not really installed" for me?!

Anything else I could try to remedy this?

[cobra_ltc]

IGNORE - It started working after a second computer restart.

[U.Wilhelm]

thy for teh feedback - topic closed