Alternative way to trigger sending messages than message gateway

4-Channel CAN Router with Data Logger
Post Reply
SamIO
Posts: 3
Joined: Fri 6. Oct 2023, 15:05

Alternative way to trigger sending messages than message gateway

Post by SamIO » Fri 26. Jan 2024, 11:05

Hello,

Using the PCAN-Router pro, I need to return messages after receiving a RTR with a different ID. I currently am using the "Message gateway" to trigger sending the message. E.g. I receive a remote frame on ID 0x5000Ah and I want to respond on ID 0xAh.
Example.png
Example.png (16.92 KiB) Viewed 2089 times
This triggering is working well but the problem is that it seems that the amount of "message gateway"s is limited to 120. I need about double that amount. Is there an alternative way of triggering messages or something similar? Or expand the limit?

Thank you in advance.

User avatar
PEAK-Support
Sales & Support
Sales & Support
Posts: 1646
Joined: Fri 10. Sep 2010, 19:34

Re: Alternative way to trigger sending messages than message gateway

Post by PEAK-Support » Fri 26. Jan 2024, 13:01

The Mesage Limit is a fixed value in the firmware and could not be changed with limited other ressources.
--------------------------------
PEAK-System Technik
Technical Support Team
support[at]peak-system.com
-------------------------------

Post Reply