Page 1 of 1

Hardware issues found in revisions 3.1 and 3.2

Posted: Mon 20. Jun 2011, 16:02
by F.Hessemer
We've located two issues regarding the GPRS-Link hardware in revisions 3.1 and 3.2:
  • CAN transmissions not possible after wake up by ignition (Clamp 15)
  • Device won't start since some SD cards draw to much current
We strongly recommend to fix that for you, or (with experienced hands) you may DIY.
In the latter case please read the repair guide below, otherwise please ship the unit to:
PEAK-System Technik GmbH
Otto-Roehm-Str. 69
64293 Darmstadt
GERMANY
GPRS-Link_Repair-Guide.pdf
PCAN-GPRS Link repair guide
(472.62 KiB) Downloaded 641 times