Change settings through terminal

Platform for Telematic Applications
Post Reply
tox104
Posts: 3
Joined: Tue 5. Apr 2016, 12:52

Change settings through terminal

Post by tox104 » Tue 5. Apr 2016, 13:18

Hello i cant figure out how to change settings through terminal.
? responds with possible commands:
rg
sg

sp

g
p

#

sg -returns default config
Previous posts mentioned mg command.
Maybe you could provide example string or commands to change configuration.
Terminal output
Terminal output
1.png (59.07 KiB) Viewed 3467 times

S.Michaelsen
Hardware Development
Hardware Development
Posts: 73
Joined: Fri 10. Sep 2010, 13:11

Re: Change settings through terminal

Post by S.Michaelsen » Tue 5. Apr 2016, 13:44

To cahnge e.g. the Pin:

PCAN>mg1,2222
PCAN>rg
Writing EEPROM - OK
PCAN>sg
GPRS configuration data:
updated: 2014.12.09-10:24:48
IMEI:
Pin: 2222
...

Note that setting blank values might not work.

tox104
Posts: 3
Joined: Tue 5. Apr 2016, 12:52

Re: Change settings through terminal

Post by tox104 » Tue 5. Apr 2016, 14:32

Thanks for the fast reply

User avatar
M.Gerber
Design & Documentation
Design & Documentation
Posts: 64
Joined: Mon 13. Sep 2010, 16:34

Note by Moderator

Post by M.Gerber » Tue 5. Apr 2016, 14:44

Hello Tox,

Please create a new topic the next time you have a question. I've separated this question.

Thanks!
Mark

Post Reply