Red Led is blinking

This forum covers PCAN-Linux and Linux development issues concerning our products
Post Reply
AhmedMah92
Posts: 2
Joined: Wed 8. Dec 2021, 14:28

Red Led is blinking

Post by AhmedMah92 » Thu 9. Dec 2021, 15:27

Hello everyone,

I am working with peak CAN usb with linux and it is connected to a jungheinrich forklift.
I have a problem that the led is always red and blinking and I chose the correct bitrate for the initialization which is 250000.
candump can0 is working fine and it generates can frames with ID and Data on the linux terminal

I saw people say that it if you have a correct connection the led will be green.

Would you please can anyone help me with this issue ?

Thanks in advance

M.Heidemann
Sales & Support
Sales & Support
Posts: 786
Joined: Fri 20. Sep 2019, 13:31

Re: Red Led is blinking

Post by M.Heidemann » Thu 9. Dec 2021, 15:31

Hello, If you have a PCAN-USB (White Case, non FD)
this is normal, as it only has a red LED.

Blinking means Data is transmitted.

The green LED for example is present in a PCAN-USB FD (Black case)

Best Regards

Marvin

AhmedMah92
Posts: 2
Joined: Wed 8. Dec 2021, 14:28

Re: Red Led is blinking

Post by AhmedMah92 » Thu 9. Dec 2021, 16:13

Hi Marvin,

it is not FD, so I believe I am doing well.

Thank you so much for these information.

Wish you a great day

Ahmed

Post Reply