timestamp issue

This forum covers PCAN-Linux and Linux development issues concerning our products
JGarza
Posts: 7
Joined: Wed 2. Dec 2020, 12:01

Re: timestamp issue

Post by JGarza » Mon 7. Dec 2020, 09:41

So I though I made the installation right but still I cannot make the driver work:

when I do:
sudo modprobe pcan

I get:
modprobe: FATAL: Module pcan not found in directory /lib/modules/5.4.0-56-generic

M.Heidemann
Sales & Support
Sales & Support
Posts: 503
Joined: Fri 20. Sep 2019, 13:31

Re: timestamp issue

Post by M.Heidemann » Mon 7. Dec 2020, 09:48

Hello,
can you please post your full installation command history?

Do you have all the required packages installed (see chapter 2.2 of the PCAN-Linux Documentation)?

http://www.peak-system.com/fileadmin/me ... an_eng.pdf


Please also retry installation as follows, from the driver directory:

Code: Select all

sudo make uninstall
Will uninstall previously installed PCAN-drivers

Code: Select all

make clean

Code: Select all

make NET=NETDEV_SUPPORT

Code: Select all

sudo make install

Code: Select all

sudo modprobe pcan
Compile, install and load PCAN-Linux driver in NetDev-mode.

Please report back to me if this was able to resolve your issue.

Best Regards

Marvin

Post Reply