Question about Terminal resistor PCAN-USB Pro

USB to CAN Interface
Post Reply
M.Maidhof
Support
Support
Posts: 1688
Joined: Wed 22. Sep 2010, 14:00

Re: Question about Terminal resistor PCAN-USB Pro

Post by M.Maidhof » Mon 7. Oct 2024, 12:50

Hi,

no, by default there is no termination resistor activated in PCAN-USB-Pro FD, but you can set solder jumpers to activate it. See manual for more details.

https://www.peak-system.com/produktcd/P ... an_eng.pdf

regards

Michael
Top
Post Reply

Return to “PCAN-USB”