High-speed USB 2.0 to CAN/LIN Interface
- Posts: 4
- Joined: Thu 9. Dec 2010, 13:40
I have Can Bus with the following specifications:
- 2.0B protocol type
- 50 KBaut
it is possible to use the PCAN-Pro for reading this rate(50KBoud) .. as far I know the PCAN-pro is a High speed can reader .. and the 50 Kboud is in the range of Low speed CAN .. is that correct ?!
Thanks in advanced for your reply ..
- Posts: 1440
- Joined: Wed 22. Sep 2010, 14:00
yes its possible to use a 50k CAN Baudrate with PCAN-USB-Pro. Low and Highspeed CAN is related to the used CAN transceiver, but even with a highspeed CAN transceiver 50k will be possible without problems.