I installed the driver for Peak PCAN-USB Pro from "https://www.peak-system.com/PCAN-USB-Pr ... .html?&L=1" which is "PeakOemDrv.exe" driver. But after installing it, I'm seeing the message in the device manager that says "The drivers for this device are not installed. (Code 28). There are no compatible drivers for this device. To find a driver for this device, click Update Driver."
I'm not sure if this is the correct driver to install or not, please guide. I'm using PCAN-USB Pro on Windows 10.
Thank you!
Regards,
Jimit Shah.
Driver Installation Issue: PCAN USB Pro
- PEAK-Support
- Sales & Support
- Posts: 1646
- Joined: Fri 10. Sep 2010, 19:34
Re: Driver Installation Issue: PCAN USB Pro
Double POST - you also send this via E-Mail to our support Team! Thread will be deleted later on...
--------------------------------
PEAK-System Technik
Technical Support Team
support[at]peak-system.com
-------------------------------
PEAK-System Technik
Technical Support Team
support[at]peak-system.com
-------------------------------
Re: Driver Installation Issue: PCAN USB Pro
I installed Peak-Drivers 4.1.4 and now it shows the driver for the device needs to start. When I plug in the PCAN-USB Pro (Not FD) it will start blinking Orange.
- PEAK-Support
- Sales & Support
- Posts: 1646
- Joined: Fri 10. Sep 2010, 19:34
Re: Driver Installation Issue: PCAN USB Pro
The driver you use works also for the older USB-Pro Devices (Silver housing)
See manual for the LED Info:
https://www.peak-system.com/produktcd/P ... pdf#page18
Please reboot the PC and try again running PCAN-View
See manual for the LED Info:
https://www.peak-system.com/produktcd/P ... pdf#page18
Please reboot the PC and try again running PCAN-View
--------------------------------
PEAK-System Technik
Technical Support Team
support[at]peak-system.com
-------------------------------
PEAK-System Technik
Technical Support Team
support[at]peak-system.com
-------------------------------