The PCAN-USB IPEH-002021 does not power my TJA1054 bus converter.
In the manual I saw that pin 1 is indicated as not connected / optional + 5V.
How can I solve?
geometry dash
The bus adapter does not receive power from the PCAN-USB
-
spuriousholy
- Posts: 1
- Joined: Mon 24. Jun 2024, 05:28
-
M.Heidemann
- Sales & Support
- Posts: 1083
- Joined: Fri 20. Sep 2019, 13:31
Re: The bus adapter does not receive power from the PCAN-USB
Hi,
You will have to enable this first, please have a look at the PCAN-USB manual:
https://www.peak-system.com/produktcd/P ... an_eng.pdf
This is described starting at page 8.
Best Regards
Marvin
You will have to enable this first, please have a look at the PCAN-USB manual:
https://www.peak-system.com/produktcd/P ... an_eng.pdf
- +5v.png (58.97 KiB) Viewed 2370 times
This is described starting at page 8.
Best Regards
Marvin
---
Marvin Heidemann
PEAK-Support Team
Marvin Heidemann
PEAK-Support Team