Hello
I have written a lot of software for our diagnostic purposes using PCAN develop that works very well with PCAN-PCI and PCAN USB PRO and PCAN USB dongle.
Now I switched to PCAN-USB FD PRO with updated drives. All Peak software works well. My software can't neither read nor write messages. Do I need to update PCAN Develop?
I see in the new PCAN View there are a lot of new parameters for setting up connection.
Thank you
Andrea R.
P.S. I was trying to put this topic on PCAN USB FD PRO but there is no "New Topic" button.
PCAN-USB FD PRO
Re: PCAN-USB FD PRO
Hello,
thank you for the info. If you want to use the PCAN-USB Pro FD with CAN 2.0a/b (without FD), it should be no problem using it with your latest the PCAN-Developer 3 package. If you want to use CAN FD, you could use the PCANBasic 4.0, which is available on our support website for download.
To check your PCAN-Developer package, please send us an email to our support address with your licence number. Thank you.
best regards
Michael
thank you for the info. If you want to use the PCAN-USB Pro FD with CAN 2.0a/b (without FD), it should be no problem using it with your latest the PCAN-Developer 3 package. If you want to use CAN FD, you could use the PCANBasic 4.0, which is available on our support website for download.
To check your PCAN-Developer package, please send us an email to our support address with your licence number. Thank you.
best regards
Michael