Change of the channels order with 2 PCAN-miniPCIe FD

[A.Azpeitia]

Hello,

I have two PCAN-miniPCIe FD connected in a axiomtek. The axiomtek detect the two miniPCIe correctly but the channels order change aleatorialy when i restart the axiomtek.

If the first PCAN-miniPCI have CAN1 CAN2 CAN3 and CAN4 and the second PCAN-miniPCI CAN5, CAN6, CAN7 and CAN8, sometimes, using pcanview i can see the order CAN1 CAN2 CAN3 CAN4, CAN5, CAN6, CAN7 and CAN8.
Other times i can see the order CAN5, CAN6, CAN7, CAN8, CAN1 CAN2 CAN3 and CAN4.

This is a important problem for me because i work with the channel number.

¿could someone help me with that?

Thanks, Ander

[PEAK-Support]

On Window, you could fix the Channel see this link:

[A.Azpeitia]

Thanks U.Wilhelm,


I have tried to define the Device ID in the miniPCIe but i do not see the option:

I cant modify device ID in

`miniPCIe.png (169.46 KiB) Viewed 23146 times

On the other hand, i can see how to change the device id at a peak:

peak.png (68.56 KiB) Viewed 23146 times

Is there any way to define the identifier in the miniPCIe?
Or is there any other way to fix the order of the channels?

Thanks


best regards


Ander

[PEAK-Support]

You are right - sorry !

Here the correct Link for the PCIe based cards:
https://www.peak-system.com/forum/viewt ... Device+fix

[A.Azpeitia]

Thanks U.Wilhelm,


I try to follow the steps of the link but it seems I do something wrong.

I'm using PCAN-miniPCIe FD:

(0x118 = PCAN-miniPCIe FD)

And I can see the following configuration:

canproperties.png (33.86 KiB) Viewed 23081 times

I have configured the regedit:

regedit.png (52 KiB) Viewed 23081 times

But when I restart the PC I see the channels without configuring:

netscong.png (51.1 KiB) Viewed 23081 times

Am I getting confused in some step?

Thanks

best regards

Ander

[PEAK-Support]

You use a PCAN-Chip PCIe FD (0x119), not PCAN-Chip PCIe (0x118).

see info from my colleauge.

[A.Azpeitia]

Hi,

As you can see in the picture that I attached about CAN Hardware I am using PCAN-miniPCIe FD.

In the list that references it says that for PCAN-miniPCIe FD i need 0x118. However I tested with 0x119 and it has not worked.

Could I have made a mistake in another step?



Thanks

[PEAK-Support]

Please export the Registry Key and send it to support@peak-system.com we will check it.

[A.Azpeitia]

Sorry Uwe.

i must have made some mistake in the tests.

it works correctly.

thanks for all

[PEAK-Support]

No Problem - i also mixed up the miniPCIe FD and the PCIe FD Chip !