Page 2 of 2
Re: PCAN MicroMod Mix 2 - Analogue Voltage Range
Posted: Tue 28. Sep 2010, 18:55
by mdenton
Great, that seems to have done the job!
I now also have access to Output7, many thanks.
Re: PCAN MicroMod Mix 2 - Analogue Voltage Range
Posted: Tue 28. Sep 2010, 19:43
by mdenton
Possible bug/future feature?
Dout7 is not available within the Digital Function setup, only Dout 0.
Re: PCAN MicroMod Mix 2 - Analogue Voltage Range
Posted: Wed 29. Sep 2010, 09:49
by G.Lang
Dear Matt,
strange, i my version
2.5.2.56 of the
MicroMod configuration 2 software the Dout7 is available in the "
Digital Function" window. Please take a look at the screenshot below:
- dout7_triggered_via_din0_din1.jpg (254.95 KiB) Viewed 11565 times
When you set Din0 or Din1 to GND the LED goes on. Please send me your configuration file (*.mcf) to
support@peak-system.com
regards
Gunther
Re: PCAN MicroMod Mix 2 - Analogue Voltage Range
Posted: Wed 29. Sep 2010, 23:16
by mdenton
That is odd,
Mine definitely only has CAN and Dout0 available. Why does your only have CAN and Dout7, where is Dout0?
I have emailed you the file.
Re: PCAN MicroMod Mix 2 - Analogue Voltage Range
Posted: Thu 30. Sep 2010, 09:21
by G.Lang
Hi,
that is not odd -> this is the difference between the tab "
Function 0" and tab "
Function 7". Please switch to the "
Function 7" tab and you can also configure Dout7.
- digital_functions.jpg (73.51 KiB) Viewed 11556 times
regards
Gunther
Re: PCAN MicroMod Mix 2 - Analogue Voltage Range
Posted: Thu 30. Sep 2010, 09:43
by mdenton
Ahh I see,
I assumed that each function had access to all available digital outputs, and had not spotted you had a different tab selected.
.