PEAK-System Forum

If only the CAN Data is missing, maybe you need to check if CAN Data is available, baudrate is OK, Termination of CAN Bus is OK etc..

The first issue is was indeed not beeing able to send A CAN message via PCAN explorer to the connected GPRS link.
But this was with the unsuporting server version. (1.2.1.73 )

A termination also isn't the problem because the route the message is suppost to travel is : PCAN-Explorer --> virtual CAN-net --> PCAN-server/cliënt --> TCP-IP GPRS connenction --> PCAN GPRS-Link client.
As you can see there is no use for cables.

After installing the correct server version (1.3.1.87) It doesn't even connect any more.
As far as I know the buadrate is only to concern of the virtual net. Aslong as it doesn't connect this should not make a difference.

We go around in circles...please contact us via E-mail (you know the address), inkl. all Version informations of Software on PC and all LIB Versions you use on the PCAN-GPRS Link. If you changed source we also need the complete DIFF.