Page 1 of 1

Installing the device on the truck

Posted: Wed 16. Mar 2011, 14:58
by sberequek
Hi,

There is documentation on the installation of the "PCAN-GPRS Link" on trucks, assembly drawings, etc. because in the related documentation of the device can not find it.

thanks

Re: Installing the device on the truck

Posted: Mon 21. Mar 2011, 08:03
by S.Michaelsen
Hello sberequek,

there is no special documentation that describes how to install the GPRS-Link on a truck. There is a table in chapter 2.1 of the manual which shows the assignment of the automotive connector from the GPRS-Link.

Regards
Stephan