Reminder: CAN-termination is required!
Posted: Wed 25. May 2011, 09:16
Hi ,
we have many support querys like "no CAN-communication possible"
or similar, in many
cases the solution is very simple: The network is not terminated
. Please take care that
the network is terminated
and try it again.
Please take also a look at wikipedia (for highspeed or ISO 11898-2 based systems)
international
http://en.wikipedia.org/wiki/CAN-bus -> Physical Layer
german
http://de.wikipedia.org/wiki/Controller_Area_Network -> Topologie
thanks
Gunther
we have many support querys like "no CAN-communication possible"
or similar, in many cases the solution is very simple: The network is not terminated
. Please take care that the network is terminated
and try it again.Please take also a look at wikipedia (for highspeed or ISO 11898-2 based systems)
international
http://en.wikipedia.org/wiki/CAN-bus -> Physical Layer
german
http://de.wikipedia.org/wiki/Controller_Area_Network -> Topologie
thanks
Gunther