PEAK-System Forum

Hello everyone,

Does anyone knows how to delete messages with a specific CAN-ID from the Transmit List through VBS?
I don't want to clear all the Transmit List, just to erase some messages, according to their CAN-IDs...

Thanks in advance!

Here you find a simple Macro which generate 3 differnt CAN-ID´s in the Transmit List: ID 0x100, ID 0x110 and ID 0x120. Then the macro search in the Transmit List for the ID 0x100, ID 0x110 and ID0x120 and delete them.
Hope that solve your problem.

U.Wilhelm wrote:Here you find a simple Macro which generate 3 differnt CAN-ID´s in the Transmit List: ID 0x100, ID 0x110 and ID 0x120. Then the macro search in the Transmit List for the ID 0x100, ID 0x110 and ID0x120 and delete them.
Hope that solve your problem.

Code: Select all

Option Explicit

Sub TransmitListSample_Start()

   Dim msg1, msg2, msg3
   ' generate 3 Messages and add to transmit List
   Set msg1 = Connections.TransmitMessages.Add
   
   ' Initialize the CAN message
   
   PrintToOutputWindow "Create 3 new Msgs in Transmit list - every Second a new one"
   With msg1
      .ID = &H100
      .DLC = 3
      .Data(0) = &H11
      .Data(1) = &H22
      .Data(2) = &H33
      .CycleTime =25
      If Connections.Count > 0 Then _
         Set .Connection = Connections(1)
   End With
   
   Wait(700) ' 700msec delay
   
   Set msg2 = Connections.TransmitMessages.Add
   With msg2
      .ID = &H110
      .DLC = 4
      .Data(0) = &H12
      .Data(1) = &H23
      .Data(2) = &H34
      .Data(3) = &H45
      .CycleTime =50
      If Connections.Count > 0 Then _
         Set .Connection = Connections(1)
   End With
   
   Wait(700) ' 700msec delay
   
   Set msg3 = Connections.TransmitMessages.Add
   With msg3
      .ID = &H120
      .DLC = 8
      .Data(0) = &H1
      .Data(1) = &H2
      .Data(2) = &H3
      .Data(3) = &H4
      .Data(4) = &H5
      .Data(5) = &H6
      .Data(6) = &H7                                    
      .Data(7) = &H8      
      .CycleTime =100
      If Connections.Count > 0 Then _
         Set .Connection = Connections(1)
   End With
   
   ' now search in the list for ID ßx100
   Set msg2 = Connections.TransmitMessages.FindID(&H100)
   MsgBox msg2.Count & " times CAN ID 0x100 found in Transmit List - now delete it"
   for each msg3 in msg2 ' search in thje collection of msg2 all IDs (msg3)
   	Connections.TransmitMessages.Remove msg3 ' and delet them
   next
   
   Wait(500)
   
   ' now search in the list for ID ßx110
   Set msg2 = Connections.TransmitMessages.FindID(&H110)
   MsgBox msg2.Count & " times CAN ID 0x110 found in Transmit List - now delete it"
   for each msg3 in msg2 ' search in thje collection of msg2 all IDs (msg3)
   	Connections.TransmitMessages.Remove msg3 ' and delet them
   next

   Wait(500)
   
   ' now search in the list for ID ßx120
   Set msg2 = Connections.TransmitMessages.FindID(&H120)
   MsgBox msg2.Count & " times CAN ID 0x120 found in Transmit List - now delete it"
   for each msg3 in msg2 ' search in thje collection of msg2 all IDs (msg3)
   	Connections.TransmitMessages.Remove msg3 ' and delet them
   next
   
End Sub

Thank you U.Wilhelm! It works like a charm!