PEAK-System Forum

Code: Select all

//  pcaneventread.cpp
//
//  ~~~~~~~~~~~~
//
//  PCANBasic Example: Event Read
//
//  ~~~~~~~~~~~~
//
//  ------------------------------------------------------------------
//  Author : Thomas Haber (thomas@toem.de)
//  Last change: 18.06.2010
//
//  Language: C++
//  ------------------------------------------------------------------
//
//  Copyright (C) 1999-2010  PEAK-System Technik GmbH, Darmstadt
//  more Info at http://www.peak-system.com
//  ------------------------------------------------------------------
//
// linux@peak-system.com
// www.peak-system.com
//
//  ------------------------------------------------------------------
//  History:
//  07-11-2013 Stephane Grosjean
//  - Move DWORD definition from "unsigned long" to "__u32" to run on 64-bits
//    Kernel
//  - Change initital bitrate from 250K to 500K (default pcan driver bitrate)
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#include <stdio.h>
#include <sys/time.h>
#include <asm/types.h>
#include <unistd.h>

/*
#define DWORD  __u32
#define WORD   unsigned short
#define BYTE   unsigned char
#define LPSTR  char*
*/
#include "../pcanbasic/PCANBasic.h"

////////////////////////////////////////////////////////////////////////////////////////////////////
/// <summary>	Main entry-point for this application. </summary>
///
/// <remarks>	 </remarks>
///
/// <param name="argc">	The argc. </param>
/// <param name="argv">	[in,out] If non-null, the argv. </param>
///
/// <returns>	. </returns>
////////////////////////////////////////////////////////////////////////////////////////////////////

int main(int argc, char* argv[]) 
{
	TPCANMsg Message;
	TPCANStatus Status;
	unsigned long ulIndex = 0;
	fd_set Fds;

	Status = CAN_Initialize(PCAN_USBBUS1, PCAN_BAUD_500K, 0, 0, 0);
	printf("Initialize CAN: %i\n", (int) Status);

	int fd;
	CAN_GetValue(PCAN_USBBUS1, PCAN_RECEIVE_EVENT, &fd,sizeof(int));

	/* Watch stdin (fd 0) to see when it has input. */
	FD_ZERO(&Fds);
	FD_SET(fd, &Fds);

	while (select(fd+1, &Fds, NULL, NULL, NULL) > 0) {
		Status = CAN_Read(PCAN_USBBUS1, &Message, NULL);
		if (Status != PCAN_ERROR_OK) {
			printf("Error 0x%x\n", (int) Status);
			break;
		}

		printf("  - R ID:%4x LEN:%1x DATA:%02x %02x %02x %02x %02x %02x %02x %02x\n",
				(int) Message.ID, (int) Message.LEN, (int) Message.DATA[0],
				(int) Message.DATA[1], (int) Message.DATA[2],
				(int) Message.DATA[3], (int) Message.DATA[4],
				(int) Message.DATA[5], (int) Message.DATA[6],
				(int) Message.DATA[7]);
	}

	return 0;
}