PEAK-System Forum

Hello,

I have two PCAN-miniPCIe FD connected in a axiomtek. The axiomtek detect the two miniPCIe correctly but the channels order change aleatorialy when i restart the axiomtek.

If the first PCAN-miniPCI have CAN1 CAN2 CAN3 and CAN4 and the second PCAN-miniPCI CAN5, CAN6, CAN7 and CAN8, sometimes, using pcanview i can see the order CAN1 CAN2 CAN3 CAN4, CAN5, CAN6, CAN7 and CAN8.
Other times i can see the order CAN5, CAN6, CAN7, CAN8, CAN1 CAN2 CAN3 and CAN4.

This is a important problem for me because i work with the channel number.

¿could someone help me with that?

Thanks, Ander

On Window, you could fix the Channel see this link:

Thanks U.Wilhelm,


I have tried to define the Device ID in the miniPCIe but i do not see the option:

On the other hand, i can see how to change the device id at a peak:
Is there any way to define the identifier in the miniPCIe?
Or is there any other way to fix the order of the channels?

Thanks


best regards


Ander

You are right - sorry !

Here the correct Link for the PCIe based cards:
https://www.peak-system.com/forum/viewt ... Device+fix

Thanks U.Wilhelm,


I try to follow the steps of the link but it seems I do something wrong.

I'm using PCAN-miniPCIe FD:

(0x118 = PCAN-miniPCIe FD)

And I can see the following configuration:




I have configured the regedit:




But when I restart the PC I see the channels without configuring:

Am I getting confused in some step?

Thanks

best regards

Ander

You use a PCAN-Chip PCIe FD (0x119), not PCAN-Chip PCIe (0x118).

see info from my colleauge.

Hi,

As you can see in the picture that I attached about CAN Hardware I am using PCAN-miniPCIe FD.

In the list that references it says that for PCAN-miniPCIe FD i need 0x118. However I tested with 0x119 and it has not worked.

Could I have made a mistake in another step?



Thanks

Please export the Registry Key and send it to support@peak-system.com we will check it.

Sorry Uwe.

i must have made some mistake in the tests.

it works correctly.

thanks for all

No Problem - i also mixed up the miniPCIe FD and the PCIe FD Chip !