Page 1 of 1
Uploading the Firmware
Posted: Wed 7. Nov 2018, 14:30
by Aleksei Blumenthal
Hello!
Please advise if it is possible to connect and upload a firmware to the pcan router using CAN-bus-USB converter not PEAK system production? if it is possible please advise how to do this?
Best regards,
Alexey
Re: Uploading the Firmware
Posted: Wed 7. Nov 2018, 15:20
by M.Maidhof
Hi,
no, PCAN-Flash only supports PCAN hardware.
regards
Michael
Re: Uploading the Firmware
Posted: Thu 8. Nov 2018, 13:42
by Aleksei Blumenthal
Hello Michael,
thanks a lot for your reply.
regards
Aleksei
Re: Uploading the Firmware
Posted: Wed 14. Nov 2018, 15:30
by Aleksei Blumenthal
Hello Michael,
Please advise what hardware is better to use for the firmware uploading to PCAN Router, its production date is June 2018?
regards
Aleksei
Re: Uploading the Firmware
Posted: Mon 19. Nov 2018, 10:30
by M.Maidhof
Hi,
you can use any PCAN CAN PC Interface:
https://www.peak-system.com/PC-Interfaces.196.0.html
simplest solution will be PCAN-USB IPEH-002021
regards
Michael