Page 1 of 1
PCAN MIO: Characteristic Curve applicable to analog input?
Posted: Fri 7. Oct 2022, 09:32
by Techteam
I would like some clarification about characteristic curves with PCAN MIO. The tutorial covers applying a characteristic curve to a received message. I want to apply a characteristic curve to an analogue input and then transmit the corrected value. As the measured value is transmitted and not received will it still apply the curve if I follow the tutorial and create a second message.
Re: PCAN MIO Characteristic Curve
Posted: Fri 7. Oct 2022, 13:25
by G.Lang
Hi,
yes, that´s also possible. Below an example with doubles the analog input to the output
- define_the_symbol-1.jpg (142.29 KiB) Viewed 11760 times
- define_the_symbol-2.jpg (140.38 KiB) Viewed 11760 times
- set_the_CAN-output-3.jpg (122.17 KiB) Viewed 11760 times
- set_IO-4.jpg (127.11 KiB) Viewed 11760 times
- set_IO-5.jpg (131.1 KiB) Viewed 11760 times
- set_the_curve-6.jpg (286.31 KiB) Viewed 11760 times
- set_the_functionblock-7.jpg (289.92 KiB) Viewed 11760 times
- result_8.jpg (421.14 KiB) Viewed 11760 times
Configuration:
For more infos please take a look into the PCAN-MIO tutorials.
Regards
Gunther
Re: PCAN MIO Characteristic Curve
Posted: Mon 10. Oct 2022, 08:41
by Techteam
Thanks. Excellent reply.
Kind Regards
Re: PCAN MIO Characteristic Curve
Posted: Thu 13. Oct 2022, 16:44
by PEAK-Support
Topic closed