PEAK-System Forum

The PCAN-USB IPEH-002021 does not power my TJA1054 bus converter.
In the manual I saw that pin 1 is indicated as not connected / optional + 5V.
How can I solve?
geometry dash

Hi,

You will have to enable this first, please have a look at the PCAN-USB manual:

https://www.peak-system.com/produktcd/P ... an_eng.pdf

: +5v.png (58.97 KiB) Viewed 2373 times

This is described starting at page 8.

Best Regards

Marvin

PEAK-System Forum

The bus adapter does not receive power from the PCAN-USB

The bus adapter does not receive power from the PCAN-USB

Re: The bus adapter does not receive power from the PCAN-USB